[Macboatmaster]

Work today cancelled windows too strong - for my job - commercial boating

Did you try the clean boot please - if so what was the result.

will await Pitstop

[Northy]

I did not. I will try tonight it just didn't load in IE Or Chrome. Out till 10:30 odd.

[Northy]

NVIDIA updated to latest drivers. PC PitStop results are in, how do I send them to you?

[Macboatmaster]

Please post the URL internet address, from your Results, back here into this Topic Thread so that we can review the configuration.

[Northy]

http://www.pcpitstop...?conid=24997248

Probably get on with the clean boot tomorrow.

[Northy]

I have tried the clean boot just now and still the same. However I managed to grab a picture of the blue screen on my phone. It's an 8mp camera so it's a pretty clear and readable picture, message me if you wish to see.

[Macboatmaster]

1. Attach it please as a screenshot

convert to jpeg with image on screen

prt scrn key

paint

edit tab

paste

then on reply use full editor and attach.

2. Run a WMD please

Control Panel. In search type memory

scroll down to administrative tools and diagnose memory and then run the program please.

3. On that motherboard there is gigabyte easy tune basically for overclocking the system

please check if that has been used to later settings for ram voltages timings, processor voltages etc. and if so return to default please, as many of the errors indicate a possible thermal issue a possible sign of overclocking

EasyTune6 GIGABYTE has completely redesigned EasyTune6 from the ground up to make it easier than ever to manage and monitor your hardware resources as well as tweak your system settings in order to achieve maximum system performance. Whether you are an overclocking enthusiast, or a computer novice, EasyTune6 provides the tools you need to quickly and effortlessly fine tune your system.


4. I am not sure how your 4Gb of ram is made up. If it is in 2 sticks of 2Gb and is 1800 mhz see this

(Note 2) To reach DDR3 1800MHz or above, you must install two memory modules and install them in the DDR3_3 and DDR3_4 memory sockets.

[Northy]

Currently out shall do when I return.

[Northy]

Error screen as attached.

Attached thumbnail(s)

• 

[Macboatmaster]

Same as before

On Thu 19/07/2012 17:33:49 GMT your computer crashed
crash dump file: C:\Windows\Minidump\071912-22183-01.dmp
This was probably caused by the following module: unknown_module_00000000`000000a6.sys (Unloaded_Unknown_Module_00000000`000000a6+0x5B)
Bugcheck code: 0x101 (0x31, 0x0, 0xFFFFF88002F64180, 0x2)
Error: CLOCK_WATCHDOG_TIMEOUT
Bug check description: This indicates that an expected clock interrupt on a secondary processor, in a multi-processor system, was not received within the allocated interval.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: unknown_module_00000000`000000a6.sys .
Google query: unknown_module_00000000`000000a6.sys CLOCK_WATCHDOG_TIMEOUT


http://msdn.microsof...1(v=vs.85).aspx

[Northy]

Ah right. Also ran the memory test and no errors were detected.

[Macboatmaster]

please do the others and I will be back about 2000

goodnight - working 0900 -1700

[Northy]

I'll be around the same rough time. I've got my phone if needed.

[Northy]

Nothing on that fix list appeared to do anything for me.

[Macboatmaster]

Sorry about this you caught me just as I was about to sign off.

Early start 0530

Will post by 2000 after reviewing topic and seeing if I can make any further suggestions.

For the time being


http://forums.steamp....php?p=31810135

you have already installed the two mentioned from Microsoft.

Please see if you find anything else of use.