[Jolen98]

i need help with my screen shuttn off im in safe mode that is the only mode that it doesnt shut off

[Advertisements]

Boot the PC then keep tapping the F8 key until you get the options screen, select safe mode with networking to go here for everest home

http://www.lavalys.c...p?pid=1&lang=en

click + next to computer then summary, see which video adapter you have the go to the manufacturers site to get the latest drivers, save it to disk as you may not get it to install in safe mode

If you have the software already for the video card then you can use that, though the ones from the manufacturers site will be the latest ones.

Edited by Keith, 06 June 2005 - 02:30 PM.

[Retired Tech]

Boot the PC then keep tapping the F8 key until you get the options screen, select safe mode with networking to go here for everest home

http://www.lavalys.c...p?pid=1&lang=en

click + next to computer then summary, see which video adapter you have the go to the manufacturers site to get the latest drivers, save it to disk as you may not get it to install in safe mode

If you have the software already for the video card then you can use that, though the ones from the manufacturers site will be the latest ones.

Edited by Keith, 06 June 2005 - 02:30 PM.

[Jolen98]

i already did all that
and as i said im in safe mode rit now

[Retired Tech]

Which video adapter have you got

[Jolen98]

Nvidia GeForce2 GTS/GeForce2 Pro

[Retired Tech]

The following motherboard BIOS settings are suggested for better stability, but are not required settings:

Assign IRQ to VGA Enabled
VGA palettenooping Disabled
PCI Latency Timer 128
Video BIOS Shadowing Disabled
Video RAM Shadowing Disabled
USWC Options Disabled
PnP O/S Installed Enabled
Video BIOS Cacheable Disabled
Video RAM Cacheable Disabled
AGP Graphics Aperture 64MB (or half of your total system memory)

[Jolen98]

so should i set all
how do i get into bios on xp again

[Retired Tech]

Boot the PC and keep tapping the delete key right after the beep until it goes to BIOS set up

[Jolen98]

should i change all the ones u said

[Retired Tech]

That is from the Nvidia site and what they recommend

[Jolen98]

thxs will do i just ave to write them down i dont ave printer hookd up yet
wrote them down
this better work
me be back and let u know
thxs again

Edited by Jolen98, 06 June 2005 - 03:33 PM.

[Jolen98]

hey gerry ave been lookn for u all day
do u think i should do wat he says
im not sayn that what he said is wrong it just that i dont want to mess my comp up more

[Jolen98]

well im gonna try those settings be back

[Jolen98]

that didnt work and i could only change these settings
VGA Palettenooping Disabled

then these settings were already set
USWC Options Disabled

then this setting i couldnt change
PCI Latency Timer

im sick of having to only go in safe mode

[Jolen98]

i know ther is some1 who can help me