Jump to content

Welcome to Geeks to Go - Register now for FREE

Need help with your computer or device? Want to learn new tech skills? You're in the right place!
Geeks to Go is a friendly community of tech experts who can solve any problem you have. Just create a free account and post your question. Our volunteers will reply quickly and guide you through the steps. Don't let tech troubles stop you. Join Geeks to Go now and get the support you need!

How it Works Create Account
Photo

Is my Graphics Card breaking down?


  • Please log in to reply

#46
phillpower2

phillpower2

    Mechanised Mod

  • Global Moderator
  • 24,749 posts

Thanks for the update Smudge  :thumbsup:

 

Every check that you have done has been ok :headscratch: 

I can only think of the slower Ram now being checked, try stress testing your Ram with Prime95, details here


  • 0

Advertisements


#47
Smudgeboss

Smudgeboss

    Member

  • Topic Starter
  • Member
  • PipPip
  • 52 posts

Hi again Phillpower  (who talks to you more than me?   :) )

 

I am running the prime 95 torture test on the one that mentions the most use of ram.  been running about 12 hours now.  I have included a screenshot so you can see what is happening.  I will continue to run it until I achieve failure (I presume). or maybe what you see tells you enough, I will await your advice.   

 

Task manager tells me my cpu is at 100%   ram at 49%

 

Thank you

Attached Thumbnails

  • Prime 95 April 11 print screen.png

  • 0

#48
phillpower2

phillpower2

    Mechanised Mod

  • Global Moderator
  • 24,749 posts

Hello Smudge

 

12 hours was more than adequate but good news that there was no crashes  :thumbsup:

How long did you run it for in total, did it crash at all.

 

To check what is using your CPU run Process Explorer, there is no need to install it just choose the Run option which can be found in the upper right corner here let us know what you find.


  • 0

#49
Smudgeboss

Smudgeboss

    Member

  • Topic Starter
  • Member
  • PipPip
  • 52 posts

Hi Phillpower:

 

Total time ran for the Prime95 was 19 hours, no crash.  

 

Ran Process Explorer major user was Idle process Generally around 99.3 % but of course varying.   Most everything else was in the 0.01-0.03% range  System interrupts would go up to .14,   Chrome was generally low in the 0.3  up at times to .5%   and process explorer itself was probably one of the highest at .15%

 

I have included a screenshot of the top processes showing on one screen without scrollling down.

Attached Thumbnails

  • Process explorer Ap 12 11.55 am.png

  • 0

#50
phillpower2

phillpower2

    Mechanised Mod

  • Global Moderator
  • 24,749 posts

Can you also provide the bottom part of the results for us.


  • 0

#51
Smudgeboss

Smudgeboss

    Member

  • Topic Starter
  • Member
  • PipPip
  • 52 posts

Hi Phillpower:  

 

I have attached screenshot from larger monitor so it contains all the processes running this morning.

 

Something else that might give a hint, and makes me feel like I have been wasting your time.

 

Last night I was leading a meeting and ran two videos.  The first one was a 5 minute video streamed from youtube.  Sound was normal but about 4 times in the 5 minutes the video froze for about 3 seconds then picked up with the sound, as it has always been doing as per my original concern.  

 

The second video had been downloaded to my computer and was running off my hard drive.  it was 1 hour long and worked like a dream with no video freeze at all.  I should have checked this first.  Could the issue be with my wireless card?  Maybe I shouldn't even suggest that just tell you the facts and let the expert go where he thinks they lead.  Anyway that is the latest scoop.

 

thanks, Especially if I led you down a rabbit trail to begin with.

Attached Thumbnails

  • Process explorer Ap 14 11.37.png

  • 0

#52
phillpower2

phillpower2

    Mechanised Mod

  • Global Moderator
  • 24,749 posts

Not a problem  :thumbsup:

 

Try clearing the cache and cookies, details here

 

I don`t see anything untoward in Process Explorer btw.


  • 0

#53
Smudgeboss

Smudgeboss

    Member

  • Topic Starter
  • Member
  • PipPip
  • 52 posts

I cleared EVERYTHING from the cache and cookies . . . no change :)

 

Thanks for your patience Phill


  • 0

#54
phillpower2

phillpower2

    Mechanised Mod

  • Global Moderator
  • 24,749 posts

Check Adobe Flashplayer, details here

 

Make sure that you have the latest version of Java, details here only enable Java when you are watching a video that requires it and disable it when finished with it.

 

1.Press the Windows key then type in cmd (do not press enter)
2.In the search results that come up, right click “cmd” and run as administrator, when the screen flashes and asks for permission, accept it.
3.In the command prompt type in ipconfig /flushdns (or right click and paste it to the command prompt) then press Enter.
You should then see a dialog box saying successfully flushed resolver cache, if so you are done post back with an update.


  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP