Jump to content

Welcome to Geeks to Go - Register now for FREE

Need help with your computer or device? Want to learn new tech skills? You're in the right place!
Geeks to Go is a friendly community of tech experts who can solve any problem you have. Just create a free account and post your question. Our volunteers will reply quickly and guide you through the steps. Don't let tech troubles stop you. Join Geeks to Go now and get the support you need!

How it Works Create Account
Photo

Silicon Power 1TB cannot see in *My computer* but can see in *Dev &

HDD missing data lost

  • Please log in to reply

#1
RamblerOnTheGo

RamblerOnTheGo

    New Member

  • Member
  • Pip
  • 2 posts

Hi New here and in dire need of help.

I have a 1TB Silicon Power Ext HD that gave up the ghost on me for some inexplicable reason. Was working on an XP laptop and then when I switched to a Windows 7 Prem Desktop, no joy. Now it wont work on anything.I can see it in *Device and Computers* but cannot see the drive in my computer. Once again its the data that I need desperately. I cannot even see it to make a backup or image. 

Any advice would be appreciated. 

 

Thanks in advance

 

Silicon.png


  • 0

Advertisements


#2
phillpower2

phillpower2

    Mechanised Mod

  • Global Moderator
  • 24,716 posts

:welcome:   RamblerOnTheGo,

 

See if Puppy Linux is able to access the drive and back up your data;

 

=================== 

***Required Hardware*** 

CD Burner (CDRW) Drive, 

Blank CD, 

Extra Storage Device (USB Flash Drive, External Hard Drive)  

=================== 

 

1. Save these files to your Desktop/Burn Your Live CD:

  • Download Latest Puppy Linux ISO (i.e.: lupu-528.iso) 

    Download BurnCDCC ISO Burning Software 

     

    There are instructions on how to boot from flash drive with puppy here; http://www.pendrivel...e-from-windows/ 

     

     

  • Open BurnCDCC with Windows Explorer 

  • Extract All files to a location you can remember 

  • Double Click 1%20BurnCDCC%20Icon.PNG BurnCDCC 

  • Click Browse 2%20BurnCDCC%20Browse%20Button.PNG and navigate to the Puppy Linux ISO file you just downloaded 

  • Open/Double Click that file 

    IMPORTANT: Adjust the speed bar to CD: 4x DVD: 1x 

  • Click Start 3%20BurnCDCC%20Start%20Button.PNG 

  • Your CD Burner Tray will open automatically 

  • Insert a blank CD and close the tray 

  • Click OK 

Puppy Linux Live CD will now be created 

 

2. Set your boot priority in the BIOS to CD-ROM first, Hard Drive Second 

  •  

  • Start the computer/press the power button 

  • Immediately start tapping the appropriate key to enter the BIOS, aka "Setup" 

    (Usually shown during the "Dell" screen, or "Gateway" Screen) 

  • Once in the BIOS, under Advanced BIOS Options change boot priority to: 

    CD-ROM 1st, Hard Drive 2nd 

  • Open your ROM drive and insert the disk 

  • Press F10 to save and exit 

  • Agree with "Y" to continue 

  • Your computer will restart and boot from the Puppy Linux Live CD 

     

    4%20BIOSBootPriorityImage.png 

 

 

 

3.  Recover Your Data 

  • Once Puppy Linux has loaded, it is actually running in your computer's Memory (RAM).  You will see a fully functioning Graphical User Interface similar to what you normally call "your computer".  Internet access may or may not be available depending on your machine, so it is recommended you print these instructions before beginning.  Also, double clicking is not needed in Puppy.  To expand, or open folders/icons, just click once.  Puppy is very light on resources, so you will quickly notice it is much speedier than you are used to.  This is normal.  Ready?  Let's get started. 

     

    3a. Mount Drives 

  • Click the Mount Icon located at the top left of your desktop. 5%20Puppy%20Linux%20Mount%20Icon.PNG 

  • A Window will open.  By default, the "drive" tab will be forward/highlighted.  Click on Mount for your hard drive. 

  • Assuming you only have one hard drive and/or partition, there may be only one selection to mount. 

  • USB Flash Drives usually automatically mount upon boot, but click the "usbdrv" tab and make sure it is mounted. 

  • If using an external hard drive for the data recovery, do this under the "drive" tab.  Mount it now. 

 

3b. Transfer Files.

  •  

  • At the bottom left of your desktop a list of all hard drives/partitions, USB Drives, and Optical Drives are listed with a familiar looking hard drive icon. 

  • Open your old hard drive i.e. sda1 

  • Next, open your USB Flash Drive or External Drive. i.e. sdc or sdb1 

  • If you open the wrong drive, simply X out at the top right corner of the window that opens. (Just like in Windows) 

  • From your old hard drive, drag and drop whatever files/folders you wish to transfer to your USB Drive's Window. 

 

For The Novice:  The common path to your pictures, music, video, and documents folders is: Documents and Settings >> All Users (or each idividual name of each user. CHECK All Names!) >> Documents >> You will now see My Music, My Pictures, and My Videos

 

Remember to only click once!  No double clicking!  Once you drag and drop your first folder, you will notice a small menu will appear giving you the option to move or copy.  Choose COPY each time you drag and drop. 

 

YOU ARE DONE!!!  Simply click Menu >> Mouse Over Shutdown >> Reboot/Turn Off Computer.  Be sure to plug your USB Drive into another working windows machine to verify all data is there and transferred without corruption. Congratulations! 

 

 

 

PuppyLinux528screenshot.png 

 


  • 0

#3
iammykyl

iammykyl

    Tech Staff

  • Technician
  • 7,659 posts

It's been a while since we heard from you.   Have you managed to backup your Data?   An update would be appreciated.


  • 0

#4
RamblerOnTheGo

RamblerOnTheGo

    New Member

  • Topic Starter
  • Member
  • Pip
  • 2 posts

Hi Thanks for the reply ...been a bit inundated, but I will give this a try and then give feedback. Thanks again


  • 0

#5
iammykyl

iammykyl

    Tech Staff

  • Technician
  • 7,659 posts

:thumbsup:  :rockon:


  • 0






Similar Topics


Also tagged with one or more of these keywords: HDD missing, data lost

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP