[bellagirl24]

Yesterday, I was on my computer and had to leave for a while so I decided to leave my computer on sleep mode, instead of just shutting it off. I just had Firefox running.  When I came back, I tried to turn it on and it was stuck on the "starting windows" screen. So I turned it off and on again, yet it was still stuck. I tried running in Safe Mode with command prompt, as I was reading a tutorial on a possible was to fix it, but it got stuck on a screen where it was loading files. I tried to go into regular safe mode after, but whenever I try, instead of the black screen with those optios, a blue box comes up asking what drive to use to boot? I'm not sure what I'm doing wrong this time that I can\t go back into the previous screen. I know there's another option where I create a repair disk on another computer which is possible but is that the only solution left?

 

If anything, I'd like to know how this could have happened?? It was working perfectly fine yesterday before I left.

 

If this is the only solution I have then fine, as long as it doesn't require wiping my hdd, I have important files and if I could afford and external hdd to save them, then I would just ask my mum if we could take the computer to be repaired by someone with more experience than me.

[Advertisements]

   bellagirl24,

 

It is possibly a coincidence that this happened in sleep mode and it may have happened on next start up in any event, from what you describe a damaged OS or bad hard drive are possible causes and as you have important data on the drive I suggest that you try and secure that first using Puppy Linux using the details below; not sure of your computer knowledge so anything you are not sure of let us know;

 

=================== 

***Required Hardware*** 

CD Burner (CDRW) Drive, 

Blank CD, 

Extra Storage Device (USB Flash Drive, External Hard Drive)  

=================== 

 

1. Save these files to your Desktop/Burn Your Live CD:

• Download Latest Puppy Linux ISO (i.e.: lupu-528.iso) 

  Download BurnCDCC ISO Burning Software 

   

  There are instructions on how to boot from flash drive with puppy here; http://www.pendrivel...e-from-windows/ 

   

   

• Open BurnCDCC with Windows Explorer 

• Extract All files to a location you can remember 

• Double Click BurnCDCC 

• Click Browse and navigate to the Puppy Linux ISO file you just downloaded 

• Open/Double Click that file 

  IMPORTANT: Adjust the speed bar to CD: 4x DVD: 1x 

• Click Start  

• Your CD Burner Tray will open automatically 

• Insert a blank CD and close the tray 

• Click OK 

Puppy Linux Live CD will now be created 

 

2. Set your boot priority in the BIOS to CD-ROM first, Hard Drive Second 

•  

• Start the computer/press the power button 

• Immediately start tapping the appropriate key to enter the BIOS, aka "Setup" 

  (Usually shown during the "Dell" screen, or "Gateway" Screen) 

• Once in the BIOS, under Advanced BIOS Options change boot priority to: 

  CD-ROM 1st, Hard Drive 2nd 

• Open your ROM drive and insert the disk 

• Press F10 to save and exit 

• Agree with "Y" to continue 

• Your computer will restart and boot from the Puppy Linux Live CD 

   

   

 

 

 

3.  Recover Your Data 

• Once Puppy Linux has loaded, it is actually running in your computer's Memory (RAM).  You will see a fully functioning Graphical User Interface similar to what you normally call "your computer".  Internet access may or may not be available depending on your machine, so it is recommended you print these instructions before beginning.  Also, double clicking is not needed in Puppy.  To expand, or open folders/icons, just click once.  Puppy is very light on resources, so you will quickly notice it is much speedier than you are used to.  This is normal.  Ready?  Let's get started. 

   

  3a. Mount Drives 

• Click the Mount Icon located at the top left of your desktop.  

• A Window will open.  By default, the "drive" tab will be forward/highlighted.  Click on Mount for your hard drive. 

• Assuming you only have one hard drive and/or partition, there may be only one selection to mount. 

• USB Flash Drives usually automatically mount upon boot, but click the "usbdrv" tab and make sure it is mounted. 

• If using an external hard drive for the data recovery, do this under the "drive" tab.  Mount it now. 

 

3b. Transfer Files.

•  

• At the bottom left of your desktop a list of all hard drives/partitions, USB Drives, and Optical Drives are listed with a familiar looking hard drive icon. 

• Open your old hard drive i.e. sda1 

• Next, open your USB Flash Drive or External Drive. i.e. sdc or sdb1 

• If you open the wrong drive, simply X out at the top right corner of the window that opens. (Just like in Windows) 

• From your old hard drive, drag and drop whatever files/folders you wish to transfer to your USB Drive's Window. 

 

For The Novice:  The common path to your pictures, music, video, and documents folders is: Documents and Settings >> All Users (or each idividual name of each user. CHECK All Names!) >> Documents >> You will now see My Music, My Pictures, and My Videos. 

 

Remember to only click once!  No double clicking!  Once you drag and drop your first folder, you will notice a small menu will appear giving you the option to move or copy.  Choose COPY each time you drag and drop. 

 

YOU ARE DONE!!!  Simply click Menu >> Mouse Over Shutdown >> Reboot/Turn Off Computer.  Be sure to plug your USB Drive into another working windows machine to verify all data is there and transferred without corruption. Congratulations! 

 

 

 

 

 

 

 

NB: So that I can confirm that you have received notification of my reply to your topic please click on the Follow this topic tab at the upper right corner of the page. 

[phillpower2]

   bellagirl24,

 

It is possibly a coincidence that this happened in sleep mode and it may have happened on next start up in any event, from what you describe a damaged OS or bad hard drive are possible causes and as you have important data on the drive I suggest that you try and secure that first using Puppy Linux using the details below; not sure of your computer knowledge so anything you are not sure of let us know;

 

=================== 

***Required Hardware*** 

CD Burner (CDRW) Drive, 

Blank CD, 

Extra Storage Device (USB Flash Drive, External Hard Drive)  

=================== 

 

1. Save these files to your Desktop/Burn Your Live CD:

• Download Latest Puppy Linux ISO (i.e.: lupu-528.iso) 

  Download BurnCDCC ISO Burning Software 

   

  There are instructions on how to boot from flash drive with puppy here; http://www.pendrivel...e-from-windows/ 

   

   

• Open BurnCDCC with Windows Explorer 

• Extract All files to a location you can remember 

• Double Click BurnCDCC 

• Click Browse and navigate to the Puppy Linux ISO file you just downloaded 

• Open/Double Click that file 

  IMPORTANT: Adjust the speed bar to CD: 4x DVD: 1x 

• Click Start  

• Your CD Burner Tray will open automatically 

• Insert a blank CD and close the tray 

• Click OK 

Puppy Linux Live CD will now be created 

 

2. Set your boot priority in the BIOS to CD-ROM first, Hard Drive Second 

•  

• Start the computer/press the power button 

• Immediately start tapping the appropriate key to enter the BIOS, aka "Setup" 

  (Usually shown during the "Dell" screen, or "Gateway" Screen) 

• Once in the BIOS, under Advanced BIOS Options change boot priority to: 

  CD-ROM 1st, Hard Drive 2nd 

• Open your ROM drive and insert the disk 

• Press F10 to save and exit 

• Agree with "Y" to continue 

• Your computer will restart and boot from the Puppy Linux Live CD 

   

   

 

 

 

3.  Recover Your Data 

• Once Puppy Linux has loaded, it is actually running in your computer's Memory (RAM).  You will see a fully functioning Graphical User Interface similar to what you normally call "your computer".  Internet access may or may not be available depending on your machine, so it is recommended you print these instructions before beginning.  Also, double clicking is not needed in Puppy.  To expand, or open folders/icons, just click once.  Puppy is very light on resources, so you will quickly notice it is much speedier than you are used to.  This is normal.  Ready?  Let's get started. 

   

  3a. Mount Drives 

• Click the Mount Icon located at the top left of your desktop.  

• A Window will open.  By default, the "drive" tab will be forward/highlighted.  Click on Mount for your hard drive. 

• Assuming you only have one hard drive and/or partition, there may be only one selection to mount. 

• USB Flash Drives usually automatically mount upon boot, but click the "usbdrv" tab and make sure it is mounted. 

• If using an external hard drive for the data recovery, do this under the "drive" tab.  Mount it now. 

 

3b. Transfer Files.

•  

• At the bottom left of your desktop a list of all hard drives/partitions, USB Drives, and Optical Drives are listed with a familiar looking hard drive icon. 

• Open your old hard drive i.e. sda1 

• Next, open your USB Flash Drive or External Drive. i.e. sdc or sdb1 

• If you open the wrong drive, simply X out at the top right corner of the window that opens. (Just like in Windows) 

• From your old hard drive, drag and drop whatever files/folders you wish to transfer to your USB Drive's Window. 

 

For The Novice:  The common path to your pictures, music, video, and documents folders is: Documents and Settings >> All Users (or each idividual name of each user. CHECK All Names!) >> Documents >> You will now see My Music, My Pictures, and My Videos. 

 

Remember to only click once!  No double clicking!  Once you drag and drop your first folder, you will notice a small menu will appear giving you the option to move or copy.  Choose COPY each time you drag and drop. 

 

YOU ARE DONE!!!  Simply click Menu >> Mouse Over Shutdown >> Reboot/Turn Off Computer.  Be sure to plug your USB Drive into another working windows machine to verify all data is there and transferred without corruption. Congratulations! 

 

 

 

 

 

 

 

NB: So that I can confirm that you have received notification of my reply to your topic please click on the Follow this topic tab at the upper right corner of the page.