Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works
Photo

Fail to boot after starting cleanup


  • Please log in to reply

#1
noel77

noel77

    Member

  • Member
  • PipPip
  • 17 posts
Windows 8 laptop gives 'no boot device' error and makes noise as if trying to find HD. This started after slow machine and couple of BSODs and starting to clean up the machine through this site.

Won't boot into safe mode.
  • 0

Advertisements


#2
CompCav

CompCav

    Member 5k

  • Expert
  • 12,446 posts

You are being helped in the malware removal forum.  If you cannot boot into safe mode then follow the instructions to get to recovery mode and run FRST as instructed.

 

If you do not understand how to follow the instructions just ask in the malware topic.

 

Topic opened for hdd hardware check.


  • 0

#3
phillpower2

phillpower2

    Tech Staff

  • Technician
  • 20,016 posts

Hello noel77,

 

It is difficult to boot into Safe Mode in Windows 8 and 8.1 but is sometimes possible by pressing/tapping shift + F8 when you restart the computer.

 

Testing a HDD can cause a flaky drive to fail completely so trying to back up any important data should be done first, see below, if no important data is present see below the Puppy Linux instructions;

 

=================== 

***Required Hardware*** 

CD Burner (CDRW) Drive, 

Blank CD, 

Extra Storage Device (USB Flash Drive, External Hard Drive)  

=================== 

 

1. Save these files to your Desktop/Burn Your Live CD:

  • Download Latest Puppy Linux ISO (i.e.: lupu-528.iso) 

    Download BurnCDCC ISO Burning Software 

     

    There are instructions on how to boot from flash drive with puppy here; http://www.pendrivel...e-from-windows/ 

     

     

  • Open BurnCDCC with Windows Explorer 

  • Extract All files to a location you can remember 

  • Double Click 1%20BurnCDCC%20Icon.PNG BurnCDCC 

  • Click Browse 2%20BurnCDCC%20Browse%20Button.PNG and navigate to the Puppy Linux ISO file you just downloaded 

  • Open/Double Click that file 

    IMPORTANT: Adjust the speed bar to CD: 4x DVD: 1x 

  • Click Start 3%20BurnCDCC%20Start%20Button.PNG 

  • Your CD Burner Tray will open automatically 

  • Insert a blank CD and close the tray 

  • Click OK 

Puppy Linux Live CD will now be created 

 

2. Set your boot priority in the BIOS to CD-ROM first, Hard Drive Second 

  •  

  • Start the computer/press the power button 

  • Immediately start tapping the appropriate key to enter the BIOS, aka "Setup" 

    (Usually shown during the "Dell" screen, or "Gateway" Screen) 

  • Once in the BIOS, under Advanced BIOS Options change boot priority to: 

    CD-ROM 1st, Hard Drive 2nd 

  • Open your ROM drive and insert the disk 

  • Press F10 to save and exit 

  • Agree with "Y" to continue 

  • Your computer will restart and boot from the Puppy Linux Live CD 

     

    4%20BIOSBootPriorityImage.png 

 

 

 

3.  Recover Your Data 

  • Once Puppy Linux has loaded, it is actually running in your computer's Memory (RAM).  You will see a fully functioning Graphical User Interface similar to what you normally call "your computer".  Internet access may or may not be available depending on your machine, so it is recommended you print these instructions before beginning.  Also, double clicking is not needed in Puppy.  To expand, or open folders/icons, just click once.  Puppy is very light on resources, so you will quickly notice it is much speedier than you are used to.  This is normal.  Ready?  Let's get started. 

     

    3a. Mount Drives 

  • Click the Mount Icon located at the top left of your desktop. 5%20Puppy%20Linux%20Mount%20Icon.PNG 

  • A Window will open.  By default, the "drive" tab will be forward/highlighted.  Click on Mount for your hard drive. 

  • Assuming you only have one hard drive and/or partition, there may be only one selection to mount. 

  • USB Flash Drives usually automatically mount upon boot, but click the "usbdrv" tab and make sure it is mounted. 

  • If using an external hard drive for the data recovery, do this under the "drive" tab.  Mount it now. 

 

3b. Transfer Files.

  •  

  • At the bottom left of your desktop a list of all hard drives/partitions, USB Drives, and Optical Drives are listed with a familiar looking hard drive icon. 

  • Open your old hard drive i.e. sda1 

  • Next, open your USB Flash Drive or External Drive. i.e. sdc or sdb1 

  • If you open the wrong drive, simply X out at the top right corner of the window that opens. (Just like in Windows) 

  • From your old hard drive, drag and drop whatever files/folders you wish to transfer to your USB Drive's Window. 

 

For The Novice:  The common path to your pictures, music, video, and documents folders for XP is: Documents and Settings >> All Users (or each individual name of each user, for Vista and above  C:\Users\$USERNAME\[...]. CHECK All Names!) >> Documents >> You will now see My Music, My Pictures, and My Videos

 

Remember to only click once!  No double clicking!  Once you drag and drop your first folder, you will notice a small menu will appear giving you the option to move or copy.  Choose COPY each time you drag and drop. 

 

YOU ARE DONE!!!  Simply click Menu >> Mouse Over Shutdown >> Reboot/Turn Off Computer.  Be sure to plug your USB Drive into another working windows machine to verify all data is there and transferred without corruption. Congratulations! 

 

 

 

PuppyLinux528screenshot.png 

 

 

 

Run the HDDs diagnostics tool;

Make sure you select the tool that is appropriate for the brand of your hard drive http://www.tacktech.com/display.cfm?ttid=287
Depending on the program it'll create a bootable floppy or a bootable DVD/CD.
If the downloaded file is the .iso type use ImgBurn to burn the .iso file to a DVD/CD disk depending on your OS (select "Write image file to disc" option) and make the disk bootable.

RE ImgBurn: please use the custom install and uncheck the attached foistware such as "Install Entrusted Toolbar etc


  • 0

#4
williamjames07

williamjames07

    New Member

  • Member
  • Pip
  • 1 posts

May be there is some technical issue.In window 8 its difficult to reboot in safe mode.So try again!


  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP