I think 9.5 would fit I couldn't get a good pic of it but It was 10inits near about exact 10inch http://prntscr.com/9oxca6
Upgraded my processor now getting worse performance (Resolved)
Best Answer SaltySalsa , 14 January 2016 - 07:55 AM
I think I'll just try it out I'm pretty sure it will fit. But I won't be able to get it for a while anyway. But yeah thanks for all the help Also about the problem with my windows do I need to op... Go to the full post »
#46
Posted 12 January 2016 - 07:49 AM
#47
Posted 12 January 2016 - 08:20 AM
Take a look at the edited pic below of the inside of your case;
#48
Posted 12 January 2016 - 08:23 AM
#49
Posted 12 January 2016 - 08:50 AM
#50
Posted 12 January 2016 - 02:31 PM
ok i measured it again http://prntscr.com/9pb9wgif i did it wrong again i'm sorry i dont understand how you want me to measure it.
also is there a way we can talk faster like TS3 or something?
Edited by SaltySalsa, 12 January 2016 - 02:59 PM.
#51
Posted 12 January 2016 - 03:13 PM
ok i measured it again http://prntscr.com/9pb9wgif i did it wrong again i'm sorry i dont understand how you want me to measure it.
Your last picture cannot be enlarged and is not very clear.
If you remove the present video card you will see where any new card will go, see guide here to help.
also is there a way we can talk faster like TS3 or something?
Nope, assistance is only offered on the open forums.
#52
Posted 13 January 2016 - 03:58 PM
- Gday SaltySalsa.
- Have you managed to remeasure that gap yet? We just want to make sure that the card will fit OK. Don't want you to order one then have to send it back, as that will cost you more time and money.
#53
Posted 13 January 2016 - 05:08 PM
yes! ill measure it right now, was super busy and forgot.
#54
Posted 13 January 2016 - 08:58 PM
#55
Posted 14 January 2016 - 07:38 AM
Looks to be around 9.5" with a bit of clearance, hard to be 100% certain from here though
#56
Posted 14 January 2016 - 07:55 AM
Also about the problem with my windows do I need to open a new thread or can we talk about it here?
Edited by SaltySalsa, 14 January 2016 - 07:56 AM.
#57
Posted 14 January 2016 - 03:13 PM
Gday.
Yes, I think you will just squeeze in the card. Please stay with the PSU and GPU chosen, don't change to something else without telling us first.
Will post a How To later for both the PSU and GPU swap over.
Yes, best to start a new topic if you are having problems with windows, Please choose your OS version, > http://www.geekstogo...rating-systems/
#58
Posted 15 January 2016 - 04:11 AM
Hope no one minds me dropping the following in, it will hopefully avoid the need to start a new thread, if the AIO tool does not resolve the issue you will need to start a new thread SaltySalsa;
Run the All in One Repair from here, disregard the malware guidance but follow the other steps to the letter and in particular ensuring that you first create a new restore point and perform a proper Windows clean boot before running the repair, details for the clean boot here.
#59
Posted 17 February 2016 - 06:50 PM
Gday SaltySalsa
How is the computer running now? Did you do your upgrades? An update would be appreciated.
Thenks.
#60
Posted 17 February 2016 - 09:21 PM
hey i have got the card yet but i got the psu had trouble getting it to work, until i kickstarted the fan with a screw driver the it started working. also i was thinking of upgrading my motherboard before my graphics card i feel like my processor is being bottlenecked by my motherboard
Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users