[rishabh katiyar]

My computer works good in safe mode but when i used to start it in normal mode then it get started but gets closed automaticaly when i touch any software.

[Advertisements]

    rishabh katiyar,

 

Try using msconfig in Safe Mode (without Networking) to see if you can identify anything that is causing the problem.

 

Boot the computer into Safe Mode then do the following;

 

Click on Start then Run, type msconfig and press Enter.
Click on the Startup tab make a note of what is currently starting then click the Disable All button.
Reboot and see if it runs better.
If yes, use msconfig to enable several items at a time until you find the culprit.
 

Post back with an update when ready and any questions along the way let us know.

[phillpower2]

    rishabh katiyar,

 

Try using msconfig in Safe Mode (without Networking) to see if you can identify anything that is causing the problem.

 

Boot the computer into Safe Mode then do the following;

 

Click on Start then Run, type msconfig and press Enter.
Click on the Startup tab make a note of what is currently starting then click the Disable All button.
Reboot and see if it runs better.
If yes, use msconfig to enable several items at a time until you find the culprit.
 

Post back with an update when ready and any questions along the way let us know.

[phillpower2]

Not heard back from you rishabh katiyar , do you still require assistance or is the issue now resolved, an update would be appreciated.