It certainly is correct
Thank you for your assistance
If you chose to clean your computer from what Ad-aware found please follow these instructions below…
Please make sure that you are using the * SE1R52 30.06.2005 *
Please launch Ad-Aware SE and click on the gear to access the Configuration Menu. Please make sure that this setting is applied.
Click on Tweak > Cleaning Engine > UN
check "Always try to unload modules before deletion".
Disconnect from the internet (for broadband/cable users, it is recommended that you disconnect the cable connection) and close
all open browsers or other programs you have running.
Please then boot into Safe Mode
To clean your machine, it is highly recommended that you clean the following directory contents
the directory folder):
Please run CCleaner to assist in this process. Download CCleaner
(Setup: go to >options > settings > Uncheck "Only delete files in Windows Temp folders older than 48 hours" for cleaning malware files!)
* C:\Documents and Settings\<Your Profile>\Local Settings\Temporary Internet Files
\ <- This will delete all your cached internet content including cookies.
* C:\Documents and Settings\<Your Profile>\Local Settings\Temp
* C:\Documents and Settings\<Any other users Profile>\Local Settings\Temporary Internet Files
* C:\Documents and Settings\<Any other users Profile>\Local Settings\Temp
* Empty your "Recycle Bin"
Please run Ad-Aware SE from the command lines shown in the instructions shown below.
Click "Start" > select "Run" > type the text shown in bold below (including the quotation marks and with the same spacing as shown)"C:\Program Files\Lavasoft\Ad-Aware SE Professional\Ad-Aware.exe" /full +procnuke(For the Professional version)"C:\Program Files\Lavasoft\Ad-Aware SE Plus\Ad-Aware.exe" /full +procnuke(For the Plus version)"C:\Program Files\Lavasoft\Ad-Aware SE Personal\Ad-Aware.exe" +procnuke(For the Personal version)
Click OK.Please note that the path above is of the default installion location for Ad-aware SE, if this is different, please adjust it to the location that you have installed it to.
When the scan has completed, select Next. In the Scanning Results window, select the "Scan Summary" tab. Check the box next to each "target family" you wish to remove. Click next, Click OK.
If problems are caused by deleting a family, please leave it. Please shutdown/restart your computer after removal, run a new full scan and post the results as a reply.
Do not launch any programs or connect to the internet at this time.
Please then copy & paste the complete log file here. Don't quarantine or remove anything at this time, just post a complete logfile. This can sometimes takes 2-3 posts to get it all posted, once the "Summary of this scan" information is shown, you have posted all of your logfile.
Please remember when posting another logfile keep "Search for negligible risk entries" deselected
as negligible risk entries (MRU's) are not considered to be a threat. This option can be changed when choosing your scan type.
Please post back here