[AGAMER]

While I was Playing Gta 5 on My PC first 1 and Half Hours It Was Smooth, After That Micro stutter Starts..... ...This also happened While I Was Playing Mirrors Edge Catalyst But That Was in A huge Way like freezes while gaming and loading,
extra time to quit games...(NOTE:THIS HAPPENS TO ME AFTER 1 and Half Hours Gaming)
PLS HELP
MY RIG
i5 4440
CPU TEMP WHILE Gaming-56 degree
B85m Gamer MOBO
GTX 960 4gb ASUS STRIX
GPU TEMP WHILE Gaming-65 degree
8GB ddr3 1600mhz
500GB HDD
OS Windows 10 pro x64 1607Build
While GAMING CPU,MEMORY And Disk USAGES are- 47%,26%,0%
GPU TEMP WHILE Gaming-65 degree
CPU TEMP WHILE Gaming-56 degree
Pls help

I Have done All These I listed Below for Fix But it Didnt Worked
Clean Installed GPU Driver
Defragmented All Drives
Changed Turn Hard Disk After 20 min to Never In Power Options
Changed PageFile Size To 12288MB(First It Was Automatically Manage Pagefiling Size)
Changed Power To High Performance (Could This BE a Problem I Toggled tHis Soon I Installed OS )

PLS Help
PLS
PLS

[Advertisements]

Normally I would say it's getting hot but you seem to have covered that possibility tho if this is a desktop I would still open it up and clean out the interface between the heatsink and the fan and clean any other vents and fans including the power supply.

 

I don't see the point of messing with PageFile Size.  If it needs to use the PageFile then it's out of RAM and your game is going to suffer while it puts and retrieves data from the PageFile which is on the hard drive.

 

It's possible you have a memory leak in one of your programs.

 

Get Process Explorer

 

http://live.sysinter...com/procexp.exe

Save it to your desktop then run it (Vista or Win7+ - right click and Run As Administrator).  

 

View, Select Column, check Verified Signer, OK

Options, Verify Image Signatures

 

Click twice on the Private Bytes column header  to sort things by RAM usage with the big hitters at the top.  

Note the three biggest users.  

Leave Process Explorer running.

 

 

Wait a few minutes and look again.  Have the values of the biggest users changed at all?

 

Repeat for Working Set Column Header.

 

If you have a slow memory leak you can expect to see one slowly increasing.

 

Chrome appears to have a slow leak but I'm sure it would be closed during gaming so make sure you close all browsers and programs you wouldn't normally have open during gaming.

 

 

While you have it open, 

 

 

Click once or twice on the CPU column header  to sort things by CPU usage with the big hitters at the top.  

 

Wait a full minute then:

 

File, Save As, Save.  Note the file name.   Open the file  on your desktop and copy and paste the text to a reply.  That will let me see if there is anything running that should not be.

 

 

Another possibility is DPC Latency.  It's a common cause of stuttering but usually always there rather than coming on after a while.

 

You can use DPC Checker:

 

http://www.thesycon....ncy_check.shtml

 

It has a bug in Win 8/10 that makes it always read a minimum of 1000 microseconds so it will always show in the yellow but if you do not see red and it says that the PC is good for streaming audio and video then that's OK.  

 

Let's also check your event log:

 

 

1. Please download the Event Viewer Tool by Vino Rosso

http://images.malwar...om/vino/VEW.exe

and save it to your Desktop:

2. Right-click VEW.exe and Run AS Administrator

3. Under 'Select log to query', select:

 

* System

4. Under 'Select type to list', select:

* Error

* Warning

 

 

Then use the 'Number of events' as follows:

 

 

1. Click the radio button for 'Number of events'

Type 20 in the 1 to 20 box

Then click the Run button.

Notepad will open with the output log.

 

 

Please post the Output log in your next reply then repeat but select Application.  (Each time you run VEW it overwrites the log so copy the first one to a Reply or rename it before running it a second time.)

 

And your harddrive:

 

Get the free version of Speccy:

 

http://www.filehippo...download_speccy (Look in the upper right for the Download

Latest Version button  - Do NOT press the large Start Download button on the upper left!)  

Download, Save and Install it.  Tell it you do not need CCLEANER.    Run Speccy.  When it finishes (the little icon in the bottom left will stop moving), 

File, Save as Text File,  (to your desktop) note the name it gives. OK.  Open the file in notepad and delete the line that gives the serial number of your Operating System.  

(It will be near the top,  10-20  lines down.) Save the file.  Attach the file to your next post.  Attaching the log is the best option as it is too big for the forum.  Attaching is a multi step process.

 

First click on More Reply Options

Then scroll down to where you see

Choose File and click on it.  Point it at the file and hit Open.

Now click on Attach this file.

 

 

 

[RKinner]

Normally I would say it's getting hot but you seem to have covered that possibility tho if this is a desktop I would still open it up and clean out the interface between the heatsink and the fan and clean any other vents and fans including the power supply.

 

I don't see the point of messing with PageFile Size.  If it needs to use the PageFile then it's out of RAM and your game is going to suffer while it puts and retrieves data from the PageFile which is on the hard drive.

 

It's possible you have a memory leak in one of your programs.

 

Get Process Explorer

 

http://live.sysinter...com/procexp.exe

Save it to your desktop then run it (Vista or Win7+ - right click and Run As Administrator).  

 

View, Select Column, check Verified Signer, OK

Options, Verify Image Signatures

 

Click twice on the Private Bytes column header  to sort things by RAM usage with the big hitters at the top.  

Note the three biggest users.  

Leave Process Explorer running.

 

 

Wait a few minutes and look again.  Have the values of the biggest users changed at all?

 

Repeat for Working Set Column Header.

 

If you have a slow memory leak you can expect to see one slowly increasing.

 

Chrome appears to have a slow leak but I'm sure it would be closed during gaming so make sure you close all browsers and programs you wouldn't normally have open during gaming.

 

 

While you have it open, 

 

 

Click once or twice on the CPU column header  to sort things by CPU usage with the big hitters at the top.  

 

Wait a full minute then:

 

File, Save As, Save.  Note the file name.   Open the file  on your desktop and copy and paste the text to a reply.  That will let me see if there is anything running that should not be.

 

 

Another possibility is DPC Latency.  It's a common cause of stuttering but usually always there rather than coming on after a while.

 

You can use DPC Checker:

 

http://www.thesycon....ncy_check.shtml

 

It has a bug in Win 8/10 that makes it always read a minimum of 1000 microseconds so it will always show in the yellow but if you do not see red and it says that the PC is good for streaming audio and video then that's OK.  

 

Let's also check your event log:

 

 

1. Please download the Event Viewer Tool by Vino Rosso

http://images.malwar...om/vino/VEW.exe

and save it to your Desktop:

2. Right-click VEW.exe and Run AS Administrator

3. Under 'Select log to query', select:

 

* System

4. Under 'Select type to list', select:

* Error

* Warning

 

 

Then use the 'Number of events' as follows:

 

 

1. Click the radio button for 'Number of events'

Type 20 in the 1 to 20 box

Then click the Run button.

Notepad will open with the output log.

 

 

Please post the Output log in your next reply then repeat but select Application.  (Each time you run VEW it overwrites the log so copy the first one to a Reply or rename it before running it a second time.)

 

And your harddrive:

 

Get the free version of Speccy:

 

http://www.filehippo...download_speccy (Look in the upper right for the Download

Latest Version button  - Do NOT press the large Start Download button on the upper left!)  

Download, Save and Install it.  Tell it you do not need CCLEANER.    Run Speccy.  When it finishes (the little icon in the bottom left will stop moving), 

File, Save as Text File,  (to your desktop) note the name it gives. OK.  Open the file in notepad and delete the line that gives the serial number of your Operating System.  

(It will be near the top,  10-20  lines down.) Save the file.  Attach the file to your next post.  Attaching the log is the best option as it is too big for the forum.  Attaching is a multi step process.

 

First click on More Reply Options

Then scroll down to where you see

Choose File and click on it.  Point it at the file and hit Open.

Now click on Attach this file.

 

 

 

[AGAMER]

 dwms.txt   6.93KB   474 downloads

Bro This is What i Got When I cReated The Process Manager TXT

When I Took a LOOK aT CPU , There Main User is NVTRAY Which Is a Component Of NVIDIA

At Private Bytes its DWM.exe

At Working Set its also DWM.exe When I Was  Saving The File IT Automatically Named DWM i saved it and i am Posting it With This Reply Without renaming The default Name Set By Process Manager Does it mean DWM is a Main Problem For This Issue

 

When i Checked DPC Latency

The Yellow Bars Were at 500 to 1000

And It Also Says "This Machine Should Be Able To Handle Real Time Streaming Of Audio And/Or

Video Data Without Drop Outs

 

Test interval:1000

Current Latency:1000 to 1030 (Changes)

Absolute Maximum:1101

Edited by AGAMER, 28 February 2017 - 09:41 AM.

[AGAMER]

 VEW.txt   13.1KB   595 downloads  VEW.txt   13.1KB   595 downloads

Result Of Event Manager Done With The Software U Posted

 

[AGAMER]

 DESKTOP-UFC86N3.txt   54.81KB   571 downloads

Result Of Speccy

 

PLs Help Me Fix This Problem

[RKinner]

Your hard drive is showing some reallocated sectors and some pending so it's had problems.   Also showing lots of read and UltraDMA CRC Errors so might be time to consider cloning it and replacing it.

 

In the mean time I would force Windows to do a disk check then dism and sfc:

 

http://www.thewindow...cking-windows-8

 

You will have to reboot and the diskcheck should then run.  May take a few hours.

 

After the disk check then do:

 

Open an elevated command prompt:

 

http://www.howtogeek...-in-windows-10/

 

 

If you open an elevated command prompt it will by default open in c:\Windows\system32

 

Once you have an elevated command prompt:

 

Type(with an Enter after each line):

 

 DISM  /Online  /Cleanup-Image  /RestoreHealth

 

 (I use two spaces so you can be sure to see where one space goes.)

This will take a while to complete.  Once the prompt returns:

 

Reboot.  Open an elevated Command Prompt again and type (with an Enter after the line):

 

sfc  /scannow

 

 

 

This will also take a few minutes.  

 

When it finishes it will say one of the following:

 

Windows did not find any integrity violations (a good thing)

Windows Resource Protection found corrupt files and repaired them (a good thing)

Windows Resource Protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

 

If you get the last result then type:

 

findstr  /c:"[SR]"  \windows\logs\cbs\cbs.log  >  \junk.txt 

 

Hit Enter.  Then type::

 

 

notepad  \junk.txt 

 

Hit Enter. 

 

 Copy the text from notepad and paste it into a reply.

 

 

After you finish SFC, regardless of the result:

 

 

 

1. Please download the Event Viewer Tool by Vino Rosso

http://images.malwar...om/vino/VEW.exe

and save it to your Desktop:

2. Right-click VEW.exe and Run AS Administrator

3. Under 'Select log to query', select:

 

* System

4. Under 'Select type to list', select:

* Error

* Warning

 

 

Then use the 'Number of events' as follows:

 

 

1. Click the radio button for 'Number of events'

Type 20 in the 1 to 20 box

Then click the Run button.

Notepad will open with the output log.

 

 

Please post the Output log in your next reply then repeat but select Application.  (Each time you run VEW it overwrites the log so copy the first one to a Reply or rename it before running it a second time.)

 

The last time you ran VEW both logs were for System.

[AGAMER]

Bro i Will try And Snd The reply By tommorow

THNX For The CoOperation With Me

[AGAMER]

After The SFC Scan Result

windows resource Protection found corrupt files and successfully repaired

them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For

example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not

supported in offline servicing scenarios.

[AGAMER]

 VEW 2.txt   9.91KB   566 downloads  VEW 1.txt   13.27KB   569 downloads

 

These Are the Event viewer Generated text File After SFC Scan

VEW 1 is The Systems And VEW 2 Is The Applications.....

Edited by AGAMER, 01 March 2017 - 02:14 AM.

[AGAMER]

Bro I tested GTA 5 After This And This Stutter Stil Exists Bro....Help

[RKinner]

I'm in Florida USA so Eastern Standard time.  GMT-5 so don't expect replies when it's after midnight here.

 

Did DISM run OK?  

 

I'm seeing file system problems even after running the disk check, dism & sfc so it may be time to clone your hard drive and replace it.

 

Some folders can't be found and others seem to have permission problems.

 

Log: 'Application' Date/Time: 02/03/2017 7:52:49 AM

Type: Error Category: 5973

Event: 5973 Source: Microsoft-Windows-Immersive-Shell

Activation of app Microsoft.Windows.Cortana_cw5n1h2txyewy!CortanaUI failed with error: The directory name is invalid. See the Microsoft-Windows-TWinUI/Operational log for additional information.

 

 

Log: 'System' Date/Time: 02/03/2017 7:53:44 AM
Type: Error Category: 0
Event: 10001 Source: Microsoft-Windows-DistributedCOM
Unable to start a DCOM Server: CortanaUI as Unavailable/Unavailable. The error: "267" Happened while starting this command: "C:\Windows\SystemApps\Microsoft.Windows.Cortana_cw5n1h2txyewy\SearchUI.exe" -ServerName:CortanaUI.AppXa50dqqa5gqv4a428c9y1jjw7m3btvepj.mca

 

 

Error: "267" is:  

ERROR_DIRECTORY

267 (0x10B)

The directory name is invalid.

 

 

 

Log: 'System' Date/Time: 02/03/2017 6:52:44 AM

Type: Error Category: 0

Event: 7000 Source: Service Control Manager

The luafv service failed to start due to the following error:  This driver has been blocked from loading

 

 

I have no idea why the luafv service is getting blocked.  The file should have been fixed with SFC and DISM

 

Let's clear the events, reboot and look again.  Perhaps it has been fixed and this is an old event.

Copy the next line:

for /F "tokens=*" %1 in ('wevtutil.exe el') DO wevtutil.exe cl "%1"

Open an elevated command prompt:

 

http://www.howtogeek...-in-windows-10/

 

right click and Paste (or Edit then Paste) and the copied line should appear.  Hit Enter.  There will be a few errors but ignore them.

 

Reboot.

 

Run VEW again for both System and Application.

 

 

[AGAMER]

 VEW 2.txt   4.41KB   521 downloads  VEW.txt   886bytes   493 downloads

 yes dism doesnt show any error

 

these are the results of vew after running  command given by you

 

VEW 2 is of applications

 

VEW is of systems

Edited by AGAMER, 01 March 2017 - 09:02 AM.

[RKinner]

For these errors:

Log: 'Application' Date/Time: 02/03/2017 2:57:46 PM

Type: Error Category: 5973

Event: 5973 Source: Microsoft-Windows-Immersive-Shell

Activation of app Microsoft.WindowsStore_8wekyb3d8bbwe!App failed with error: This app can't be activated by the Built-in Administrator. See the Microsoft-Windows-TWinUI/Operational log for additional information.

 

 

See:

https://support.micr...application-log

 

This is another sign of a sick hard drive since it is not remembering your user profile correctly.

 

 

 

This one:

 

Log: 'System' Date/Time: 02/03/2017 2:54:58 PM

Type: Error Category: 0

Event: 7000 Source: Service Control Manager

The luafv service failed to start due to the following error:  This driver has been blocked from loading

 

 

is probably because you have UAC disabled.

 

This one:

 

Log: 'System' Date/Time: 02/03/2017 2:54:47 PM

Type: Warning Category: 212

Event: 219 Source: Microsoft-Windows-Kernel-PnP

The driver \Driver\WUDFRd failed to load for the device ACPI\PNP0A0A\2&daba3ff&0.

 

 

 

is easy to fix.  Search for

 

services.msc

hit Enter

This will bring up the services window.  Scroll down to 

Windows Driver Foundation - User-mode Driver Framework

and right click and select Properties.  Change the Startup Type: from Manual to Automatic.

 

 

[AGAMER]

Bro is these the errors causing stutter.... So for the first error i need to create new windows acc and start using tht acc?... Bro how to enable UAC...

I am so confused by first fix... Can u explain wht to do

Edited by AGAMER, 01 March 2017 - 10:57 AM.

[RKinner]

Basically they just want to you create a new user, give it admin rights and then reboot and  log in to the new user.  Then see if you get the same errors.  If you repeat the instructions to clear the alarms before you log off:

 

Copy the next line:

for /F "tokens=*" %1 in ('wevtutil.exe el') DO wevtutil.exe cl "%1"

Open an elevated command prompt:

 

http://www.howtogeek...-in-windows-10/

 

right click and Paste (or Edit then Paste) and the copied line should appear.  Hit Enter.  There will be a few errors but ignore them.

 

then after you reboot and login as the new user you can run VEW again as before and easily see if it fixed anything.

 

 

If and only if it fixes the problem do you need to try and follow through with the rest of the fix.

 

To turn on UAC

 

https://articulate.c...f-in-windows-10