Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works
Photo

Stuck in BSOD boot loop, won't start repair or setup recovery [Clo


  • This topic is locked This topic is locked

#1
Whowouldntdoit

Whowouldntdoit

    New Member

  • Member
  • Pip
  • 1 posts
Windows 10
Stuck in Boot loop with BSOD error self diagnostics screen with
STOP CODE: DRIVER IRQL NOT LESS OR EQUAL
WHAT Failed: ndistpr64.sys
  • 0

Advertisements


#2
JSntgRvr

JSntgRvr

    Global Moderator

  • Global Moderator
  • 10,938 posts

Welcome. :)

Download Farbar Recovery Scan Tool and save it a flash drive.

Note: You need to run the version compatible with your system. If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.
 
Insert the USB flash drive into the computer and reach the Recovery Environment Command prompt.
 
Entry points into WinRE

Your users can access WinRE features through the Boot Options menu, which can be launched from Windows in a few different ways:

  • From the login screen, click Shutdown, then hold down the Shift key while selecting Restart.
  • In Windows 10, select Start > Settings > Update & security > Recovery > under Advanced Startup, click Restart  now.
  • Boot to recovery media.
  • Use a hardware recovery button (or button combination) configured by the OEM.

After any of these actions is performed, all user sessions are signed off and the Boot Options menu is displayed. If your users select a WinRE feature from this menu, the PC restarts into WinRE and the selected feature is launched.

WinRE starts automatically after detecting the following issues:

  • Two consecutive failed attempts to start Windows.
  • Two consecutive unexpected shutdowns that occur within two minutes of boot completion.
  • A Secure Boot error (except for issues related to Bootmgr.efi).
  • A BitLocker error on touch-only devices.

Boot options menu

This menu enables your users to perform these actions:

  • Start recovery, troubleshooting, and diagnostic tools.
  • Boot from a device (UEFI only).
  • Access the Firmware menu (UEFI only).
  • Choose which operating system to boot, if multiple operating systems are installed on the PC.

You will choose the troubleshooting options to reach the Command prompt.
dep-winre-menu.png
 
Once in the Command Prompt:

  • In the command window type in notepad and press Enter.
  • The notepad opens. Under File menu select Open.
  • Select "Computer" and find your flash drive letter and close the notepad.
  • In the command window type e:\frst (for x64 bit version type e:\frst64) and press Enter
    Note: Replace letter e with the drive letter of your flash drive.
  • The tool will start to run.
  • When the tool opens click Yes to disclaimer.
  • Press Scan button.
  • It will make a log (FRST.txt) in the flash drive. Please copy and paste its contents to your reply.

 


  • 0

#3
JSntgRvr

JSntgRvr

    Global Moderator

  • Global Moderator
  • 10,938 posts

Due to lack of feedback, this topic has been closed.

If you need this topic reopened, please contact a staff member. This applies only to the original topic starter. Everyone else please begin a New Topic.


  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP