How is everything progressing, do you need more assistant on this issue?
Laptop Won't Boot
Posted 13 May 2018 - 09:47 AM
For some reason the 260MB Fat32 System partition is not been assigned a drive letter can you please again execute below commands and if you can post the results of the commands.
Diskpart Select Disk 0 Select volume 5 Assign Letter=W Exit bcdboot C:\Windows /s W: /f ALL bootrec /scanos bootrec /rebuildbcd
Posted 14 May 2018 - 02:23 PM
At the Command Prompt, type below commands as shown and then press Enter:
Diskpart Select Disk 0 Select volume 5 Assign Letter=W Exit
bcdedit /export C:\bcdbackup
The bcdedit command is used here to export the BCD store as a file: bcdbackup. There's no need to specify a file extension.
The command should return the following on screen:
The operation completed successfully.
Meaning the BCD export worked as expected.
At this point, you need to adjust several file attributes for the BCD store so you can manipulate it. At the prompt, execute the attrib command exactly like this:
attrib w:\boot\bcd -h -r -s
What you just did with the attrib command was remove the hidden, read-only, and system attributes from the file bcd. Those attributes restricted the actions you could take on the file. Now that they're gone, you can manipulate the file more freely - specifically, rename it.
To rename the BCD store, execute the ren command as shown:
ren w:\boot\bcd bcd.old
Now that the BCD store is renamed, you should now be able to successfully rebuild it.
Try rebuilding the BCD again by executing the following, followed by Enter:
bootrec /scanos bootrec /rebuildbcd
If there were not errors restart your computer after rebuilding the BCD store. If there was error when executing any one of the commands please post the error message.
Posted 15 May 2018 - 06:31 AM
Can you please post a screenshot of below commands.
Diskpart List Disk
We might need to create a new System partition but i need to know which disk partition type you are using and List Disk will help me find that information.
Posted 15 May 2018 - 09:55 AM
Lets first set the Fat32 partition type and see this will resolve the issue.
Diskpart Select disk 0 select volume 5 set id=c12a7328-f81f-11d2-ba4b-00a0c93ec93b exit
Restart your computer to see issue resolves.
Posted 15 May 2018 - 10:16 AM
This is the output I received from entering the commands.
Microsoft Windows [Version 10.0.14393] X:\windows\system32>diskpart Microsoft DiskPart version 10.0.14393.0 Copyright (C) 1999-2013 Microsoft Corporation. On computer: MININT-F72ONCM DISKPART> list disk Disk ### Status Size Free Dyn Gpt -------- ------------- ------- ------- --- --- Disk 0 Online 465 GB 1024 KB * DISKPART> select Disk 0 Disk 0 is now the selected disk. DISKPART> select volume 5 Volume 5 is the selected volume. DISKPART> set id=c12a7328-f81f-11d2-ba4b-00a0c93ec93b DiskPart successfully set the partition ID.
After restarting the PC, it's showing the same issue as before.
Edited by robkbriggs, 15 May 2018 - 10:44 AM.
Posted 15 May 2018 - 10:46 AM
From Command Prompt execute below commands one at a time:
Diskpart List Disk Select Disk 0 Select volume 5 DELETE VOLUME Create Partition EFI FORMAT FS=FAT32 LABEL="ESP" Assign Letter=W Exit bcdboot C:\Windows /s W: /f ALLReboot your computer to see issue resolved.
Posted 15 May 2018 - 03:17 PM
Sorry we need to execute DELETE PARTITION OVERRIDE i'm not sure if this command will work without us selecting partition try it if it does not then please execute List partition command and let me have the output of this command.
Edited by FreeBooter, 15 May 2018 - 03:17 PM.
Posted 15 May 2018 - 03:45 PM
after issuing the DELETE PARTITION OVERRIDE command, it came back with an output of;
Diskpart successfully deleted the selected partition.
Would you like me to continue with the rest of the commands?
Posted 16 May 2018 - 07:24 AM
Edited by FreeBooter, 16 May 2018 - 07:24 AM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users