Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works
Photo

network NO, or network YES


  • Please log in to reply

#1
scotchtape

scotchtape

    Member

  • Member
  • PipPip
  • 30 posts
okay, i have verizon DSL, and a wireless modem.
Total computers 6
2 running XP, 4 running 2000

This is how i set up the network.
from wall to modem->router->1 wired to computer, rest wireless.

I talked to verizon about the conflict, and they said, the router and the modem have the same ip, so u have to change the router's ip by 1. I did that. but as soon as i do that, the whole network goes down. nothing loads, and if i change it back to 1 again then it loads, but it conflicts with modem and keeps goin off, and comin back on again....really annoying.
what I did was, to remove the conflict, i changed the router's ip by 1, then in the connection, the DNS and the DEFAULT gateway was the router's ip which was 192.168.1.2 after i changed it, and modem is 192.168.1.1. so i went to properties and TCP/IP properties and manually put the IP. Put DNS and the gateway as 192.168.1.1 as it showed in the automatic configuration. only thing i changed was gateway from XXX.XXX.XXX.2 to XXX.XXX.XXX.1.

I did that to all the computers and then all the computer have internet. but mine's loading reall slow...page loads up like 56k modem or slower, and when i go to 2wire and check the speed im at 600+kbps. what could be the problem?

i hope i explained good enough to get good help...
thanks in advance!
  • 0

Advertisements


#2
chicagotech

chicagotech

    Member

  • Member
  • PipPipPip
  • 197 posts
what you should do is enabling the DHCP on the router and let the router assign IP to all computers. So that, you won't have IP conflict.
  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP