[sabs76]

if anyone can direct me in the right direction please... help i got all the compoenents, 120 Ultra 100 Seagate HD, new ATX case, 500 watt 12 v aspire PSU, 3.0 Ghz Pentium 4, 512 Corsair memory, Asus P5LD2 and a Dvd Drive by sony... if anyone can help me with Mobo Setup and preparation... please assist me.(jumpers, psu settings, cables etc)


sabs

[Advertisements]

well it's pretty simple, now aday they make mobo's really smart no jumper settings needed it's all in the bios it should reconize your chip as long as it supports it
witch if it's a P4 3.0 LGA775 your good to go
power supply just make sure the red switch at the back of the PSU is set to 120 Volts if your in America or 220 in europe
everything else is pretty much just insert screw in and go...

[PastaBoy4]

well it's pretty simple, now aday they make mobo's really smart no jumper settings needed it's all in the bios it should reconize your chip as long as it supports it
witch if it's a P4 3.0 LGA775 your good to go
power supply just make sure the red switch at the back of the PSU is set to 120 Volts if your in America or 220 in europe
everything else is pretty much just insert screw in and go...

[PastaBoy4]

here found some reading material for you to help you out

http://www.hardwarec...tutorials/48/1/

http://www.basichard...otherboard.html

http://www.dansdata.com/sbs6.htm

Have Fun Good Luck