[nonosma]

If you want to change a slave drive to the master drive how do you go about doing it without losing any info on the original master drive?
any help would be appreciated.

[Advertisements]

Please help somebody. I am desperate. I just need to change the servant to the master and want to know how to go about doing so. there is also some info on the servant that i can not lose. i also need to know how to go about transferring the info from one disk to the other.
oh, and after reading some of the other posts, how would i make this big disk ok for my puter. it is 200 gig.
i have a gateway pentium 3 ,originally 1.2 gig hard drive.

[nonosma]

Please help somebody. I am desperate. I just need to change the servant to the master and want to know how to go about doing so. there is also some info on the servant that i can not lose. i also need to know how to go about transferring the info from one disk to the other.
oh, and after reading some of the other posts, how would i make this big disk ok for my puter. it is 200 gig.
i have a gateway pentium 3 ,originally 1.2 gig hard drive.

[Tyger]

Did you get any instructions or software with your hard drive? If so read them, or install the software in your current hard drive. If not go to the new drive mfrs. website and download what you need. It will have detailed instructions on how to use the software to make your new drive work in an older machine.

If you need any more help reply to this post.

[nonosma]

Yes it did come with directions. They are what I used in the first place. I alreaady installed the drive as the servant drive and I want to change the servant to master and get rid of the original drive. My problem is I do not know how to get all my info
from one drive to the other? I have alot of info on the primary hard drive that I still need.