When using decrypter, I can burn only one copy of a disc.... the second copy will not go beyond 25% completion and then stop.... usually will not get beyond the menu.... or 1%...I have to re-boot my system before I can burn another copy. I can copy one DVD with nero and then if I try another I can't get beyond 1% .. this is the error log I get:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <PIONEER DVD-RW DVR-109> Version: 1.58 - HA 0 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8161B>Version: 0100 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8161B atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-109 D: CDRom0
HL-DT-ST DVD-ROM GDR8161B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 639MB (654880kB)
Free physical memory: 55MB (57320kB)
Memory in use : 91 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.11.2005
DVD-Copy on the fly
6:49:32 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
6:49:32 PM #2 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-109 running
6:49:32 PM #3 Text 0 File DVDCopy.cpp, Line 293
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x04 Start 0 Len 2012688 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
6:49:32 PM #4 Text 0 File DVDCopy.cpp, Line 406
Max -1 tracks of 1 allowed to copy
1: 0 - 2012688 = 2012688, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
6:49:32 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
6:49:32 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2012687 (447:15.62, 3931MB)
6:49:32 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
6:49:32 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193
6:49:32 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:49:32 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2012688 (2012688) = #2012688/447:15.63
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2012688 blocks [PIONEER DVD-RW DVR-109]
--------------------------------------------------------------
6:49:32 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4121985024, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2012688 | lead-out | 1 | 0x41 | 0x00
6:49:33 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
6:49:33 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
6:49:33 PM #14 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
6:49:33 PM #15 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
6:49:33 PM #16 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
6:49:33 PM #17 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:49:55 PM #18 Text 0 File Cdrdrv.cpp, Line 1288
18:49:55.453 - PIONEER DVD-RW DVR-109\H0 T1 : Queue again later
6:51:32 PM #19 Text 0 File Cdrdrv.cpp, Line 1288
18:51:32.546 - PIONEER DVD-RW DVR-109\H0 T1 : Queue again later
7:01:32 PM #20 CDR -25 File Writer.cpp, Line 311
Queue again later
PIONEER DVD-RW DVR-109\H0 T1
7:01:32 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:01:32 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
7:01:34 PM #23 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 2047
7:01:36 PM #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 12:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I have downloaded the new Drivers...and this has not helped....
I have tried to Flash the drive ...but I can;t figure out the instructions....
any help would be appriciated....
Thanks