[chemonica]

Hello -

I use MS Outlook Web Access to access my work email at home. I had a spyware problem, and got that fixed. However, ever since I did that, I have not been able to access any email through Internet Explorer and MS Outlook Web Access. The webpage opens, but no messages appear - on the bottom bar it says "Error on Page". I think I have my firewall settings too high, but am not sure how to fix this.

Thanks.

[Advertisements]

Lets see if we can determine what the error is.
Go to your OWA, and go to the point where you get the error.
Down in the left hand corner there should be a yellow exclaimation point. Click on it to open the error message box.
Copy the entire error message to this thread and I'll try to see what the error is.

-Ryan

Edited by rmurphy, 06 December 2005 - 02:53 AM.

[Ryan]

Lets see if we can determine what the error is.
Go to your OWA, and go to the point where you get the error.
Down in the left hand corner there should be a yellow exclaimation point. Click on it to open the error message box.
Copy the entire error message to this thread and I'll try to see what the error is.

-Ryan

Edited by rmurphy, 06 December 2005 - 02:53 AM.

[chemonica]

Hey Ryan -

Thanks for your response. Here is what it says under the error message:

Line: 992
Char: 2
Error: Automation server can't create object
Code: 0
URL: https://mail.chemoni...s/ctrl_view.htc


Thanks again for your help,
J.

[Ryan]

It looks like there is an error with the code used for OWA. Because I do not have access to your network, your best bet would be to contact your network administrator or computer help desk.

Sorry I couldn't be more of a help.

-Ryan

[chemonica]

Hi Ryan. Thanks for your help. I went to my company's IT Department and they recommended running MS updates or downloading NetScape and working off of that. I did download Netscape and my webmail works just fine off of that, so problem solved.

Thanks again.

[Carmencita Esparoniado]

These guys from Bicester Computers have found a simple solution.
I have personally tried it and it worked for 3 dif VISTA - IE7 and IE8 systems
make sure you read until the end:

http://support.bices...p?p=473#post473

Thanks