installing XP on a sata drive
Started by
dyboguy
, Dec 07 2005 08:15 PM
#1
Posted 07 December 2005 - 08:15 PM
#2
Posted 08 December 2005 - 03:49 AM
Hi I had the same problem on my gigabyte m board you have to get a driver of the motherboard disk mine was called s1 3112R it was located in the drivers folder and had to be put onto floppy to load when you foll ow the instrutions
I hope this Helps.
I hope this Helps.
#3
Posted 08 December 2005 - 04:35 AM
Alot of the boards come with it allrady one a disk there should be two or threee different drivers that will get your system going, you can install one of them or all of them i personally install all of them but you might not get the option with that board.
Describe your system and dexcribe the problem a little more what steps are you taking and what kind of input are you getting back, do you have everything connected to the board properly and you have to follow your manual and read it at least twice before you do anything, the whole manual including the trouble shooting section.
Describe your system and dexcribe the problem a little more what steps are you taking and what kind of input are you getting back, do you have everything connected to the board properly and you have to follow your manual and read it at least twice before you do anything, the whole manual including the trouble shooting section.
#4
Posted 08 December 2005 - 03:46 PM
okay i will put the drivers on a new floppy and try again...Thanks for the help so far
Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users