smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win7(64)-sp1] (sf-5.43-1) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (Adv. Format) Device Model: WDC WD10EARS-22Y5B1 Serial Number: [No Information Found] Firmware Version: 80.0 Device is: In smartctl database [for details use: -P show] ATA Version is: [No Information Found] ATA Standard is: [No Information Found] Local Time is: Thu Apr 17 08:46:11 2014 MS SMART support is: Available - device has SMART capability. Enabled status cached by OS, trying SMART RETURN STATUS cmd. SMART support is: Enabled Error SMART Thresholds Read failed: Function not implemented Smartctl: SMART Read Thresholds failed. === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (21300) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 245) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 --- Pre-fail Always - 0 3 Spin_Up_Time 0x0027 137 135 --- Pre-fail Always - 6133 4 Start_Stop_Count 0x0032 099 099 --- Old_age Always - 1544 5 Reallocated_Sector_Ct 0x0033 200 200 --- Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 --- Old_age Always - 0 9 Power_On_Hours 0x0032 090 090 --- Old_age Always - 8019 10 Spin_Retry_Count 0x0032 100 100 --- Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 --- Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 --- Old_age Always - 1532 192 Power-Off_Retract_Count 0x0032 200 200 --- Old_age Always - 174 193 Load_Cycle_Count 0x0032 195 195 --- Old_age Always - 16082 194 Temperature_Celsius 0x0022 119 102 --- Old_age Always - 28 196 Reallocated_Event_Count 0x0032 200 200 --- Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 --- Old_age Always - 1 198 Offline_Uncorrectable 0x0030 200 200 --- Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 --- Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 --- Old_age Offline - 0 Error SMART Error Log Read failed: Function not implemented Smartctl: SMART Error Log Read Failed Error SMART Error Self-Test Log Read failed: Function not implemented Smartctl: SMART Self Test Log Read Failed Error SMART Read Selective Self-Test Log failed: Function not implemented Smartctl: SMART Selective Self Test Log Read Failed