
about:blank
#61
Posted 21 May 2008 - 11:00 PM

#62
Posted 22 May 2008 - 06:33 AM

Same results! Is this crazy or what? (But good guess)
Well... fubar.

Let me take another dip in this pool and see what I find.
#63
Posted 25 May 2008 - 08:51 AM

#64
Posted 29 May 2008 - 02:07 PM

Ummm... here's a thought. I know you don't like tabbed browsing, but I do. Suddenly, tabs wouldn't work. MS had a KB article that basically told me to re-register a set of DLL's with Windows. It worked. I don't see where this could hurt, so let me post the text of that KnowledgeBase article (I've lost the link, sorry). By the way, I know the "This applies to" at the bottom and the top doesn't mention IE7. I admit I'm just tossing this out there.
It gives the article number, so you can search for it at MS's site.
-----------------------------------------
Help and Support Help and Support Home|Select a Product|Advanced Search
You cannot open a new Internet Explorer window or nothing occurs after you click a link
View products that this article applies to.
Article ID : 281679
Last Review : November 15, 2007
Revision : 7.13
This article was previously published under Q281679
On This Page
SYMPTOMS
CAUSE
RESOLUTION
Windows XP and Windows 2000 only
Internet Explorer Administration Kit Users
IEAK for Internet Explorer 6
IEAK for Internet Explorer 5.5
IEAK for Internet Explorer 5.01
SYMPTOMS
When you click a hyperlink in an e-mail message or on a Web page, or right-click a hyperlink on a Web page and then click Open in New Window, you may experience one or more of the following symptoms: Nothing occurs.
The new window may be blank.
You may receive a scripting error message that is similar to the following error message:
No such interface supported.
Internet Explorer may not respond when you click Print or Print Preview in the File menu.
When you try to connect to Web folders, you may receive the following error message:
The current operation could not be completed because an unexpected error has occurred.
Back to the top
CAUSE
This behavior may occur for one or more of the following reasons: The (Default) value setting in one or more of the following registry keys points to an incorrect location for the Urlmon.dll file:
[HKEY_CLASSES_ROOT\CLSID\{79eac9e0-baf9-11ce-8c82-00aa004ba90b}\InprocServer32]
[HKEY_CLASSES_ROOT\CLSID\{79eac9f1-baf9-11ce-8c82-00aa004ba90b}\InprocServer32]
[HKEY_CLASSES_ROOT\CLSID\{79eac9f2-baf9-11ce-8c82-00aa004ba90b}\InprocServer32]
This Behavior May Occur if you install a customized version of Internet Explorer that was created with the Internet Explorer Administration Kit (IEAK) version 5.01 Service Pack 1 (SP1), 5.5 SP1, or 6.0.
The following registry key is missing or damaged:
HKLM\SOFTWARE\Classes\Interface\{00020400-0000-0000-C000-000000000046}
One or more of the following files is missing, damaged, or improperly registered: Urlmon.dll
Mshtml.dll
Actxprxy.dll
Oleaut32.dll
Shell32.dll
Shdocvw.dll
Back to the top
RESOLUTION
To resolve this problem in Internet Explorer, follow these steps: 1. Quit all programs that are running.
2. Click Start, and then click Run.
3. Type regsvr32 urlmon.dll, and then click OK.
4. When you receive the "DllRegisterServer in urlmon.dll succeeded" message, click OK.
If this does not resolve the problem, repeat steps 2 through 4 for each of the following files (in step 3, replace Urlmon.dll with each of the file names below): Shdocvw.dll
Actxprxy.dll
Oleaut32.dll
Mshtml.dll
Browseui.dll
Shell32.dll
Windows XP and Windows 2000 only
Restart the computer to enable the changes to take effect.
If the problem is still not resolved, verify that the following registry values are present and correct:
HKLM\SOFTWARE\Classes\Interface\{00020400-0000-0000-C000-000000000046}
Name: (Default)
Value: IDispatch
HKLM\SOFTWARE\Classes\Interface\{00020400-0000-0000-C000-000000000046}\ProxyStubClsid
Name: (Default)
Value: {00020420-0000-0000-C000-000000000046}
HKLM\SOFTWARE\Classes\Interface\{00020400-0000-0000-C000-000000000046}\ProxyStubClsid32
Name: (Default)
Value: {00020420-0000-0000-C000-000000000046}
If the problem is still not resolved, reinstall Internet Explorer. If you are using the version of Internet Explorer that is included with your operating system, reinstall or repair your operating system.
Back to the top
Internet Explorer Administration Kit Users
If this problem occurs after you install a customized version of Internet Explorer that was created with the Internet Explorer Administration Kit (IEAK) version 5.01 Service Pack 1 (SP1), 5.5 SP1, or 6.0 and is resolved by re-registering the Urlmon.dll file, contact Microsoft Product Support Services to obtain the appropriate fix below.
Back to the top
IEAK for Internet Explorer 6
A supported hotfix is now available from Microsoft. However, this hotfix is intended to correct only the problem that this article describes. Apply this hotfix only to systems that are experiencing this specific problem.
To resolve this problem, submit a request to Microsoft Online Customer Services to obtain the hotfix. To submit an online request to obtain the hotfix, visit the following Microsoft Web site:
http://go.microsoft....?linkid=6294451 (http://go.microsoft....?linkid=6294451)
Note If additional issues occur or any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. To create a separate service request, visit the following Microsoft Web site:
http://support.micro...tus/?ws=support (http://support.micro...tus/?ws=support)
The English version of this hotfix has the file attributes (or later) that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel. Date Time Version Size File name
------------------------------------------------------
11-Oct-2001 19:45 6.0.2710.1100 189,440 Ie6wzd.exe
Note This hotfix is not distributed by using a hotfix installer package but is an actual binary hotfix that you must manually replace. To do this, rename the old Ie6wzd.exe file in your IEAK installation folder\Iebin\Optional\EN folder, manually copy the hotfix into that folder, and then rebuild your IEAK package to have the hotfix included inside your package.
Important If Automatic Version Synchronization (AVS) is applied to your IEAK installation after you use this fix, you must manually apply this hotfix again.
Back to the top
IEAK for Internet Explorer 5.5
A supported hotfix is now available from Microsoft, but it is only intended to correct the problem that this article describes. Apply it only to systems that are experiencing this specific problem.
To resolve this problem, contact Microsoft Product Support Services to obtain the hotfix. For a complete list of Microsoft Product Support Services telephone numbers and information about support costs, visit the following Microsoft Web site:
http://support.micro...tus/?ws=support (http://support.micro...tus/?ws=support)
Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Microsoft Support Professional determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.
The English version of this hotfix has the file attributes (or later) that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel. Date Time Version Size File name
--------------------------------------------------------
18-Dec-2000 17:22 5.50.4612.1800 183,056 Ie5wzd.exe
Note This hotfix is not distributed by using a hotfix installer package, but is an actual binary hotfix that you must manually replace. To do this, rename the old Ie5wzd.exe file in your IEAK installation folder\Iebin\Optional\EN folder, manually copy the hotfix into that folder, and then rebuild your IEAK package to have the hotfix included inside your package.
Important If Automatic Version Synchronization (AVS) is applied to your IEAK installation after you use this fix, you must manually apply this hotfix again.
Back to the top
IEAK for Internet Explorer 5.01
A supported hotfix is now available from Microsoft, but it is only intended to correct the problem that this article describes. Apply it only to systems that are experiencing this specific problem.
To resolve this problem, contact Microsoft Product Support Services to obtain the hotfix. For a complete list of Microsoft Product Support Services telephone numbers and information about support costs, visit the following Microsoft Web site:
http://support.micro...tus/?ws=support (http://support.micro...tus/?ws=support)
Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Microsoft Support Professional determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.
The English version of this hotfix has the file attributes (or later) that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel. Date Time Version Size File name
---------------------------------------------------------
01-Nov-2000 11:01a 5.0.3210.3100 177,424 Ie5wzd.exe
Note This hotfix is not distributed by using a hotfix installer package, but is an actual binary hotfix that you must manually replace. To do this, rename the old Ie5wzd.exe file in your IEAK installation folder\Iebin\Optional\EN folder, manually copy the hotfix into that folder, and then rebuild your IEAK package to have the hotfix included inside your package.
Important If Automatic Version Synchronization (AVS) is applied to your IEAK installation after you use this fix, you must manually apply this hotfix again.
Back to the top
--------------------------------------------------------------------------------
APPLIES TO
Microsoft Internet Explorer 6.0
Microsoft Internet Explorer 5.5
Microsoft Internet Explorer 5.01
Microsoft Internet Explorer 5.0
Back to the top
Keywords: kbhotfixserver kbqfe kbbug kbenv kbfix kbie550presp2fix kbie600presp1fix kbie600sp1fix KB281679
©2008 Microsoft
#65
Posted 04 June 2008 - 10:47 PM

#66
Posted 05 June 2008 - 06:30 AM

I appreciate your efforts, but I have Windows Vista, not Windows XP nor Windows 2000. Also, my tabs work fine.
It should work in Vista, too. Like I said, I know you're not using tabbed browsing.
Do me a favor and at least try the "regsvr32" steps 1 through 4, reboot, and see if that does anything.
Worst case, those steps do something that's already done, so they do no harm.
#67
Posted 05 June 2008 - 11:59 PM

Shdocvw.dll
Actxprxy.dll
Oleaut32.dll
Mshtml.dll
Browseui.dll
#68
Posted 06 June 2008 - 06:38 AM

Since you don't mention it, I presume the problem remains?
#69
Posted 08 June 2008 - 02:21 AM

Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
As Featured On:






