In verbose mode:
This is what i found.
Unsuccessful Attempt script file:
Script started on Wed Aug 4 21:07:33 2010
]0;~
[
[email protected] [33m~[0m
$ exit
[C[Cssh -vvv
[email protected]
OpenSSH_5.4p1, OpenSSL 0.9.8m 25 Feb 2010
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to 9.120.96.188 [9.120.96.188] port 22.
debug1: Connection established.
debug1: identity file /home/Administrator/.ssh/id_rsa type -1
debug1: identity file /home/Administrator/.ssh/id_rsa-cert type -1
debug1: identity file /home/Administrator/.ssh/id_dsa type -1
debug1: identity file /home/Administrator/.ssh/id_dsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.4
debug1: match: OpenSSH_5.4 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.4
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
Read from socket failed: Connection reset by peer
]0;~
[
[email protected] [33m~[0m
$ exit
exit
Script done on Wed Aug 4 21:07:45 2010
------------------------------------------------------------------------------------
Successful script file:
Script started on Wed Aug 4 21:07:52 2010
]0;~
[
[email protected] [33m~[0m
$ exit
[C[Cssh -vvv
[email protected]
OpenSSH_5.4p1, OpenSSL 0.9.8m 25 Feb 2010
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to 9.120.96.188 [9.120.96.188] port 22.
debug1: Connection established.
debug1: identity file /home/Administrator/.ssh/id_rsa type -1
debug1: identity file /home/Administrator/.ssh/id_rsa-cert type -1
debug1: identity file /home/Administrator/.ssh/id_dsa type -1
debug1: identity file /home/Administrator/.ssh/id_dsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.4
debug1: match: OpenSSH_5.4 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.4
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa-c
[email protected],
[email protected],ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,
[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,
[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,
[email protected],hmac-ripemd160,
[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,
[email protected],hmac-ripemd160,
[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,
[email protected],zlib
debug2: kex_parse_kexinit: none,
[email protected],zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,
[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,
[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,
[email protected],hmac-ripemd160,
[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,
[email protected],hmac-ripemd160,
[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,
[email protected]
debug2: kex_parse_kexinit: none,
[email protected]
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 130/256
debug2: bits set: 497/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: host 9.120.96.188 filename /home/Administrator/.ssh/known_hosts
debug3: check_host_in_hostfile: host 9.120.96.188 filename /home/Administrator/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 1
debug1: Host '9.120.96.188' is known and matches the RSA host key.
debug1: Found key in /home/Administrator/.ssh/known_hosts:1
debug2: bits set: 497/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/Administrator/.ssh/id_rsa (0x0)
debug2: key: /home/Administrator/.ssh/id_dsa (0x0)
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug3: start over, passed a different list publickey,password,keyboard-interactive
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/Administrator/.ssh/id_rsa
debug3: no such identity: /home/Administrator/.ssh/id_rsa
debug1: Trying private key: /home/Administrator/.ssh/id_dsa
debug3: no such identity: /home/Administrator/.ssh/id_dsa
debug2: we did not send a packet, disable method
debug3: authmethod_lookup keyboard-interactive
debug3: remaining preferred: password
debug3: authmethod_is_enabled keyboard-interactive
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug3: userauth_kbdint: disable: no info_req_seen
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred:
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
[email protected]'s password:
debug3: packet_send2: adding 48 (len 66 padlen 14 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Requesting
[email protected]
debug1: Entering interactive session.
debug2: callback start
debug2: client_session2_setup: id 0
debug2: channel 0: request pty-req confirm 1
debug2: channel 0: request shell confirm 1
debug2: fd 3 setting TCP_NODELAY
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel_input_status_confirm: type 99 id 0
debug2: PTY allocation request accepted on channel 0
debug2: channel 0: rcvd adjust 2097152
debug2: channel_input_status_confirm: type 99 id 0
debug2: shell request accepted on channel 0
Last login: Sat Sep 4 05:11:19 2010 from dtmoutbound20.in.ibm.com
]0;~
[
[email protected] [33m~[0m
$ logoutdebug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug1: client_input_channel_req: channel 0 rtype
[email protected] reply 0
debug2: channel 0: rcvd eow
debug2: channel 0: close_read
debug2: channel 0: input open -> closed
debug2: channel 0: rcvd eof
debug2: channel 0: output open -> drain
debug2: channel 0: rcvd close
debug3: channel 0: will not send data after close
debug3: channel 0: will not send data after close
debug2: channel 0: obuf empty
debug2: channel 0: close_write
debug2: channel 0: output drain -> closed
debug2: channel 0: almost dead
debug2: channel 0: gc: notify user
debug2: channel 0: gc: user detached
debug2: channel 0: send close
debug2: channel 0: is dead
debug2: channel 0: garbage collecting
debug1: channel 0: free: client-session, nchannels 1
debug3: channel 0: status: The following connections are open:
#0 client-session (t4 r0 i3/0 o3/0 fd -1/-1 cc -1)
debug3: channel 0: close_fds r -1 w -1 e 6
Connection to 9.120.96.188 closed.
Transferred: sent 2056, received 2456 bytes, in 3.7 seconds
Bytes per second: sent 557.6, received 666.1
debug1: Exit status 0
]0;~
[
[email protected] [33m~[0m
$ exit
exit
Script done on Wed Aug 4 21:08:06 2010