Please help me when I got this bluescreen I was playing a downloaded game.
this computer is somewhat new, not over a year old, yet it has constant blue screens. I hope someone can help me.
Need help with your computer or device? Want to learn new tech skills? You're in the right place!
Geeks to Go is a friendly community of tech experts who can solve any problem you have. Just create a free account and post your question. Our volunteers will reply quickly and guide you through the steps. Don't let tech troubles stop you. Join Geeks to Go now and get the support you need!
0x0000000A: IRQL_NOT_LESS_OR_EQUAL
(Click to consult the online MSDN article.)
Typically due to a bad driver, or faulty or incompatible hardware or software. Use the General Troubleshooting of STOP Messages checklist above. Technically, this error condition means that a kernel-mode process or driver tried to access a memory location to which it did not have permission, or at a kernel Interrupt ReQuest Level (IRQL) that was too high. (A kernel-mode process can access only other processes that have an IRQL lower than, or equal to, its own.)
0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
(Click to consult the online MSDN article.)
Requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card).
0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
(Click to consult the online Win XP Resource Kit article.)
The system attempted to access pageable memory using a kernel process IRQL that was too high. The most typical cause is a bad device driver (one that uses improper addresses). It can also be caused by caused by faulty or mismatched RAM, or a damaged pagefile.
0x0000000A: IRQL_NOT_LESS_OR_EQUAL
(Click to consult the online MSDN article.)
Typically due to a bad driver, or faulty or incompatible hardware or software. Use the General Troubleshooting of STOP Messages checklist above. Technically, this error condition means that a kernel-mode process or driver tried to access a memory location to which it did not have permission, or at a kernel Interrupt ReQuest Level (IRQL) that was too high. (A kernel-mode process can access only other processes that have an IRQL lower than, or equal to, its own.)
Error Message:
STOP: 0x0000003B (parameter, parameter, parameter, parameter) SYSTEM_SERVICE_EXCEPTION
Explanation:
This is a Windows 2000 Executive character-mode STOP message. It indicates an exception was raised in a system service which was not handled by the system service.
User Action:
If this is the first time you have booted after installing new hardware, remove the hardware and boot again. Check the Microsoft Hardware Compatibility List to verify that the hardware and its drivers are compatible with Windows 2000. For information about the hardware, contact the supplier. If you are installing Windows 2000 for the first time, check the Windows 2000 system requirements, including the amount of RAM and disk space required to load the operating system. Also, check the Hardware Compatibility List to verify that the system can run Windows 2000. If Windows 2000 is loaded and no new hardware has been installed, reboot with recovery options set to create a dump file. If the message continues to appear, select the Last Known Good option when you reboot. If there is no Last Known Good configuration, try using the Emergency Repair Disk. If you do not have an Emergency Repair Disk, contact your technical support group.
0x0000001E: KMODE_EXCEPTION_NOT_HANDLED
(Click to consult the online MSDN article.)
The Windows kernel detected an illegal or unknown processor instruction. A Stop 0x1E condition can be caused by invalid memory and access violations similar to those that generate Stop 0xA errors. This default Windows error handler typically intercepts these problems if error-handling routines are not present in the code itself.
0 members, 0 guests, 0 anonymous users
Community Forum Software by IP.Board
Licensed to: Geeks to Go, Inc.