[VicVichk]

hello there

i m using window xp home edition and come with unmoutable boot volume problem. I download the exe file from internet in which it should be okay to boot up my desktop.

below are my questions since i do not have much experience:
1) if i save my file in the CD, do i need to run the exe file on the disc? if i click run, will it be interrupt with my laptop?
2) if it is still not workable, what i can do?

tks a lot.

[Advertisements]

Hi,

Lets give it a try.

We will need to view the system status from an external environment. You will need a USB drive and a CD to burn. There will be several steps to follow.

Download GETxPUD.exe to the desktop of your clean computer

• Run GETxPUD.exe
• A new folder will appear on the desktop.
• Open the GETxPUD folder and click on the get&burn.bat
• The program will download xpud_0.9.2.iso, and upon finished will open BurnCDCC ready to burn the image.
• Click on Start and follow the prompts to burn the image to a CD.
• Next download driver.sh to your USB drive
• Also Download Query.exe to the USB drive. In your working computer, navigate to the USB drive and click on the Query.exe. A folder and a file, query.sh, will be extracted.
• Remove the USB & CD and insert them in the sick computer
• Boot the Sick computer with the CD you just burned
• The computer must be set to boot from the CD
• In some computers you need to tap F12 and choose to boot from the CD, in others is the Esc key. Please consult your computer's documentation.
• Follow the prompts
• A Welcome to xPUD screen will appear
• Press File
• Expand mnt
• sda1,2...usually corresponds to your HDD
• sdb1 is likely your USB
• Click on the folder that represents your USB drive (sdb1 ?)
• Confirm that you see driver.sh that you downloaded there
• Press Tool at the top
• Choose Open Terminal
• Type bash driver.sh
• Press Enter
• After it has finished a report will be located on your USB drive named report.txt
• Then type bash driver.sh -af
• Press Enter
• You will be prompted to input a filename.
• Type the following:
  
  

  Winlogon.exe

• Press Enter
• If successful, the script will search for this file.
• After it has completed the search enter the next file to be searched
• Type the following:
  
  

  volsnap.sys

• Press Enter
• If successful, the script will search for this file.
• After it has completed the search enter the next file to be searched
• Type the following:
  
  

  explorer.exe

• Press Enter
• After it has completed the search enter the next file to be searched
• Type the following:
  
  

  Userinit.exe

• Press Enter
• After the search is completed type Exit and press Enter.
• After it has finished a report will be located in the USB drive as filefind.txt
• While still in the Open Terminal, type bash query.sh
• Press Enter
• After it has finished a report will be located in the USB drive as RegReport.txt
• Then type dd if=/dev/sda of=mbr.bin bs=512 count=1
  
  
  

  Leave a space among the following Statements:
  
  dd is the executable application used to create the backup
  if=/dev/sda is the device the backup is created from - the hard drive when only one HDD exists
  of=mbr.bin is the backup file to create - note the lack of a path - it will be created in the directory currently open in the Terminal
  bs=512 is the number of bytes in the backup
  count=1 says to backup just 1 sector
  
  
  It is extremely important that the if and of statements are correctly entered.

• Press Enter
• After it has finished a report will be located in the USB drive as mbr.bin
• Plug the USB back into the clean computer, zip the mbr.bin, and except for the mbr.bin zipped file, post the contents of the report.txt, filefind.txt and RegReport.txt in your next reply. The mbr.bin zipped file must be attached to your reply.

Note: Do not install or run other programs until we determine that the issue is.

[JSntgRvr]

Hi,

Lets give it a try.

We will need to view the system status from an external environment. You will need a USB drive and a CD to burn. There will be several steps to follow.

Download GETxPUD.exe to the desktop of your clean computer

• Run GETxPUD.exe
• A new folder will appear on the desktop.
• Open the GETxPUD folder and click on the get&burn.bat
• The program will download xpud_0.9.2.iso, and upon finished will open BurnCDCC ready to burn the image.
• Click on Start and follow the prompts to burn the image to a CD.
• Next download driver.sh to your USB drive
• Also Download Query.exe to the USB drive. In your working computer, navigate to the USB drive and click on the Query.exe. A folder and a file, query.sh, will be extracted.
• Remove the USB & CD and insert them in the sick computer
• Boot the Sick computer with the CD you just burned
• The computer must be set to boot from the CD
• In some computers you need to tap F12 and choose to boot from the CD, in others is the Esc key. Please consult your computer's documentation.
• Follow the prompts
• A Welcome to xPUD screen will appear
• Press File
• Expand mnt
• sda1,2...usually corresponds to your HDD
• sdb1 is likely your USB
• Click on the folder that represents your USB drive (sdb1 ?)
• Confirm that you see driver.sh that you downloaded there
• Press Tool at the top
• Choose Open Terminal
• Type bash driver.sh
• Press Enter
• After it has finished a report will be located on your USB drive named report.txt
• Then type bash driver.sh -af
• Press Enter
• You will be prompted to input a filename.
• Type the following:
  
  

  Winlogon.exe

• Press Enter
• If successful, the script will search for this file.
• After it has completed the search enter the next file to be searched
• Type the following:
  
  

  volsnap.sys

• Press Enter
• If successful, the script will search for this file.
• After it has completed the search enter the next file to be searched
• Type the following:
  
  

  explorer.exe

• Press Enter
• After it has completed the search enter the next file to be searched
• Type the following:
  
  

  Userinit.exe

• Press Enter
• After the search is completed type Exit and press Enter.
• After it has finished a report will be located in the USB drive as filefind.txt
• While still in the Open Terminal, type bash query.sh
• Press Enter
• After it has finished a report will be located in the USB drive as RegReport.txt
• Then type dd if=/dev/sda of=mbr.bin bs=512 count=1
  
  
  

  Leave a space among the following Statements:
  
  dd is the executable application used to create the backup
  if=/dev/sda is the device the backup is created from - the hard drive when only one HDD exists
  of=mbr.bin is the backup file to create - note the lack of a path - it will be created in the directory currently open in the Terminal
  bs=512 is the number of bytes in the backup
  count=1 says to backup just 1 sector
  
  
  It is extremely important that the if and of statements are correctly entered.

• Press Enter
• After it has finished a report will be located in the USB drive as mbr.bin
• Plug the USB back into the clean computer, zip the mbr.bin, and except for the mbr.bin zipped file, post the contents of the report.txt, filefind.txt and RegReport.txt in your next reply. The mbr.bin zipped file must be attached to your reply.

Note: Do not install or run other programs until we determine that the issue is.

[JSntgRvr]

Due to the lack of feedback this Topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!