[CarXiong]

Hi I've just bought a use Crucial M4 ssd and installed windows 8 rtm into it yesterday and it has given me a few bsod already. There is hardly anything install in it aside from the microsoft office, firefox, winx dvd ripper, avg internet security, combine community code pack, and winrar.

Here is the BSOD file:

==================================================
Dump File : 032513-11481-01.dmp
Crash Time : 3/25/2013 10:11:50 AM
Bug Check String : KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x0000001e
Parameter 1 : ffffffff`c0000005
Parameter 2 : fffff880`01b01a47
Parameter 3 : fffff880`02c69348
Parameter 4 : fffff880`02c68b80
Caused By Driver : tcpip.sys
Caused By Address : tcpip.sys+8ba47
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7b040
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\032513-11481-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 9200
Dump File Size : 280,680
==================================================

==================================================
Dump File : 032513-12651-01.dmp
Crash Time : 3/25/2013 8:10:02 AM
Bug Check String : IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x0000000a
Parameter 1 : 00000080`0f179990
Parameter 2 : 00000000`00000002
Parameter 3 : 00000000`00000000
Parameter 4 : fffff801`3c92c8f4
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7b040
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7b040
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\032513-12651-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 9200
Dump File Size : 280,680
==================================================

==================================================
Dump File : 032513-12261-01.dmp
Crash Time : 3/25/2013 5:38:14 AM
Bug Check String : KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x0000001e
Parameter 1 : ffffffff`c0000005
Parameter 2 : fffff880`011e3acd
Parameter 3 : 00000000`00000000
Parameter 4 : ffffffff`ffffffff
Caused By Driver : tunnel.sys
Caused By Address : tunnel.sys+facd
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7b040
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\032513-12261-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 9200
Dump File Size : 280,680
==================================================

==================================================
Dump File : 032513-12511-01.dmp
Crash Time : 3/25/2013 4:53:54 AM
Bug Check String : SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x1000007e
Parameter 1 : ffffffff`c0000005
Parameter 2 : fffff803`c3ae576c
Parameter 3 : fffff880`0ee47738
Parameter 4 : fffff880`0ee46f70
Caused By Driver : win32k.sys
Caused By Address : win32k.sys+86a00
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+4d676c
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\032513-12511-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 9200
Dump File Size : 280,680
==================================================

==================================================
Dump File : 032513-11668-01.dmp
Crash Time : 3/25/2013 4:34:01 AM
Bug Check String : SYSTEM_SERVICE_EXCEPTION
Bug Check Code : 0x0000003b
Parameter 1 : 00000000`c0000005
Parameter 2 : fffff802`5c24d2d8
Parameter 3 : fffff880`0ed5b570
Parameter 4 : 00000000`00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7b040
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7b040
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\032513-11668-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 9200
Dump File Size : 280,680
==================================================

==================================================
Dump File : 032513-13774-01.dmp
Crash Time : 3/25/2013 4:12:36 AM
Bug Check String : KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x0000001e
Parameter 1 : ffffffff`c0000005
Parameter 2 : fffff880`01d584dc
Parameter 3 : fffff800`6cba2928
Parameter 4 : fffff800`6cba2160
Caused By Driver : tcpip.sys
Caused By Address : tcpip.sys+7f4dc
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7b040
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\032513-13774-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 9200
Dump File Size : 280,680
==================================================

hope someone can tell me what's going on.

[Advertisements]

I apologize nobody has responded to sooner and I wanted to check and see if you were still in need of assistance at this time? If the issue has been resolved let me know if you would please.

Below is a short explanation of the error code you posted:

0x0000001E: KMODE_EXCEPTION_NOT_HANDLED
The Windows kernel detected an illegal or unknown processor instruction. A Stop 0x1E condition can be caused by invalid memory and access violations similar to those that generate Stop 0xA errors. This default Windows error handler typically intercepts these problems if error-handling routines are not present in the code itself.

I would suggest first checking your memory using the following instructions:


A If you have more than one RAM module installed, try starting computer with one RAM stick at a time.

NOTE Keep in mind, the manual check listed above is always superior to the software check, listed below. DO NOT proceed with memtest, if you can go with option A

B. If you have only one RAM stick installed...
...run memtest...


1. Download - Pre-Compiled Bootable ISO (.zip). If you prefer to use the USB version then use this link USB KEY
2. Unzip downloaded /memtest86+-4.20.iso.zip file.
3. Inside, you'll find /memtest86+-4.20.iso file.
4. Download, and install ImgBurn: http://www.imgburn.com/
5. Insert blank CD into your CD drive.
6. Open ImgBurn, and click on Write image file to disc
7. Click on Browse for a file... icon:



8. Locate memtest86+-4.20.iso file, and click Open button.
9. Click on ImgBurn green arrow to start burning bootable memtest86 CD:



10. Once the CD is created, boot from it, and memtest will automatically start to run. You may have to change the boot sequence in your BIOS to make it work right.

To change Boot Sequence in your BIOS

Reboot the system and at the first post screen (where it is counting up memory) start tapping the DEL button
This will enter you into the Bios\Cmos area.
Find the Advanced area and click Enter
Look for Boot Sequence or Boot Options and highlight that click Enter
Now highlight the first drive and follow the directions on the bottom of the screen on how to modify it and change it to CDrom.
Change the second drive to the C or Main Drive
Once that is done then click F10 to Save and Exit
You will prompted to enter Y to verify Save and Exit. Click Y and the system will now reboot with the new settings.


The running program will look something like this depending on the size and number of ram modules installed:




It's recommended to run 5-6 passes. Each pass contains very same 8 tests.

This will show the progress of the test. It can take a while. Be patient, or leave it running overnight.



The following image is the test results area:



The most important item here is the “errors” line. If you see ANY errors, even one, most likely, you have bad RAM.

[rshaffer61]

I apologize nobody has responded to sooner and I wanted to check and see if you were still in need of assistance at this time? If the issue has been resolved let me know if you would please.

Below is a short explanation of the error code you posted:

0x0000001E: KMODE_EXCEPTION_NOT_HANDLED
The Windows kernel detected an illegal or unknown processor instruction. A Stop 0x1E condition can be caused by invalid memory and access violations similar to those that generate Stop 0xA errors. This default Windows error handler typically intercepts these problems if error-handling routines are not present in the code itself.

I would suggest first checking your memory using the following instructions:


A If you have more than one RAM module installed, try starting computer with one RAM stick at a time.

NOTE Keep in mind, the manual check listed above is always superior to the software check, listed below. DO NOT proceed with memtest, if you can go with option A

B. If you have only one RAM stick installed...
...run memtest...


1. Download - Pre-Compiled Bootable ISO (.zip). If you prefer to use the USB version then use this link USB KEY
2. Unzip downloaded /memtest86+-4.20.iso.zip file.
3. Inside, you'll find /memtest86+-4.20.iso file.
4. Download, and install ImgBurn: http://www.imgburn.com/
5. Insert blank CD into your CD drive.
6. Open ImgBurn, and click on Write image file to disc
7. Click on Browse for a file... icon:



8. Locate memtest86+-4.20.iso file, and click Open button.
9. Click on ImgBurn green arrow to start burning bootable memtest86 CD:



10. Once the CD is created, boot from it, and memtest will automatically start to run. You may have to change the boot sequence in your BIOS to make it work right.

To change Boot Sequence in your BIOS

Reboot the system and at the first post screen (where it is counting up memory) start tapping the DEL button
This will enter you into the Bios\Cmos area.
Find the Advanced area and click Enter
Look for Boot Sequence or Boot Options and highlight that click Enter
Now highlight the first drive and follow the directions on the bottom of the screen on how to modify it and change it to CDrom.
Change the second drive to the C or Main Drive
Once that is done then click F10 to Save and Exit
You will prompted to enter Y to verify Save and Exit. Click Y and the system will now reboot with the new settings.


The running program will look something like this depending on the size and number of ram modules installed:




It's recommended to run 5-6 passes. Each pass contains very same 8 tests.

This will show the progress of the test. It can take a while. Be patient, or leave it running overnight.



The following image is the test results area:



The most important item here is the “errors” line. If you see ANY errors, even one, most likely, you have bad RAM.