Latency monitor:
_________________________________________________________________________________________________________
CONCLUSION
_________________________________________________________________________________________________________
Your system appears to be suitable for handling real-time audio and other tasks without dropouts.
LatencyMon has been analyzing your system for 0:00:26 (h:mm:ss) on all processors.
_________________________________________________________________________________________________________
SYSTEM INFORMATION
_________________________________________________________________________________________________________
Computer name: DESKTOP-6JBP3L9
OS version: Windows 11, 10.0, version 2009, build: 22000 (x64)
Hardware: Inspiron 3670, Dell Inc.
BIOS: 2.15.0
CPU: GenuineIntel Intel® Core i3-8100 CPU @ 3.60GHz
Logical processors: 4
Processor groups: 1
Processor group size: 4
RAM: 8006 MB total
_________________________________________________________________________________________________________
CPU SPEED
_________________________________________________________________________________________________________
Reported CPU speed (WMI): 360 MHz
Reported CPU speed (registry): 360 MHz
Note: reported execution times may be calculated based on a fixed reported CPU speed. Disable variable speed settings like Intel Speed Step and AMD Cool N Quiet in the BIOS setup for more accurate results.
_________________________________________________________________________________________________________
MEASURED INTERRUPT TO USER PROCESS LATENCIES
_________________________________________________________________________________________________________
The interrupt to process latency reflects the measured interval that a usermode process needed to respond to a hardware request from the moment the interrupt service routine started execution. This includes the scheduling and execution of a DPC routine, the signaling of an event and the waking up of a usermode thread from an idle wait state in response to that event.
Highest measured interrupt to process latency (µs): 180.0
Average measured interrupt to process latency (µs): 10.432969
Highest measured interrupt to DPC latency (µs): 138.70
Average measured interrupt to DPC latency (µs): 3.117470
_________________________________________________________________________________________________________
REPORTED ISRs
_________________________________________________________________________________________________________
Interrupt service routines are routines installed by the OS and device drivers that execute in response to a hardware interrupt signal.
Highest ISR routine execution time (µs): 87.405556
Driver with highest ISR routine execution time: HDAudBus.sys - High Definition Audio Bus Driver, Microsoft Corporation
Highest reported total ISR routine time (%): 0.005676
Driver with highest ISR total time: HDAudBus.sys - High Definition Audio Bus Driver, Microsoft Corporation
Total time spent in ISRs (%) 0.006664
ISR count (execution time <250 µs): 472
ISR count (execution time 250-500 µs): 0
ISR count (execution time 500-1000 µs): 0
ISR count (execution time 1000-2000 µs): 0
ISR count (execution time 2000-4000 µs): 0
ISR count (execution time >=4000 µs): 0
_________________________________________________________________________________________________________
REPORTED DPCs
_________________________________________________________________________________________________________
DPC routines are part of the interrupt servicing dispatch mechanism and disable the possibility for a process to utilize the CPU while it is interrupted until the DPC has finished execution.
Highest DPC routine execution time (µs): 176.685556
Driver with highest DPC routine execution time: ntoskrnl.exe - NT Kernel & System, Microsoft Corporation
Highest reported total DPC routine time (%): 0.100211
Driver with highest DPC total execution time: iaStorAC.sys - Intel® Rapid Storage Technology driver - x64, Intel Corporation
Total time spent in DPCs (%) 0.240996
DPC count (execution time <250 µs): 25569
DPC count (execution time 250-500 µs): 0
DPC count (execution time 500-10000 µs): 0
DPC count (execution time 1000-2000 µs): 0
DPC count (execution time 2000-4000 µs): 0
DPC count (execution time >=4000 µs): 0
_________________________________________________________________________________________________________
REPORTED HARD PAGEFAULTS
_________________________________________________________________________________________________________
Hard pagefaults are events that get triggered by making use of virtual memory that is not resident in RAM but backed by a memory mapped file on disk. The process of resolving the hard pagefault requires reading in the memory from disk while the process is interrupted and blocked from execution.
NOTE: some processes were hit by hard pagefaults. If these were programs producing audio, they are likely to interrupt the audio stream resulting in dropouts, clicks and pops. Check the Processes tab to see which programs were hit.
Process with highest pagefault count: googledrivefs.exe
Total number of hard pagefaults 1274
Hard pagefault count of hardest hit process: 1156
Number of processes hit: 20
_________________________________________________________________________________________________________
PER CPU DATA
_________________________________________________________________________________________________________
CPU 0 Interrupt cycle time (s): 0.572202
CPU 0 ISR highest execution time (µs): 87.405556
CPU 0 ISR total execution time (s): 0.006951
CPU 0 ISR count: 472
CPU 0 DPC highest execution time (µs): 176.685556
CPU 0 DPC total execution time (s): 0.205766
CPU 0 DPC count: 22517
_________________________________________________________________________________________________________
CPU 1 Interrupt cycle time (s): 0.218109
CPU 1 ISR highest execution time (µs): 0.0
CPU 1 ISR total execution time (s): 0.0
CPU 1 ISR count: 0
CPU 1 DPC highest execution time (µs): 116.551667
CPU 1 DPC total execution time (s): 0.010771
CPU 1 DPC count: 931
_________________________________________________________________________________________________________
CPU 2 Interrupt cycle time (s): 0.202255
CPU 2 ISR highest execution time (µs): 0.0
CPU 2 ISR total execution time (s): 0.0
CPU 2 ISR count: 0
CPU 2 DPC highest execution time (µs): 88.451667
CPU 2 DPC total execution time (s): 0.026876
CPU 2 DPC count: 1621
_________________________________________________________________________________________________________
CPU 3 Interrupt cycle time (s): 0.148822
CPU 3 ISR highest execution time (µs): 0.0
CPU 3 ISR total execution time (s): 0.0
CPU 3 ISR count: 0
CPU 3 DPC highest execution time (µs): 125.586667
CPU 3 DPC total execution time (s): 0.007974
CPU 3 DPC count: 500
_________________________________________________________________________________________________________