Inexperience Windows XP User
Posted 17 April 2006 - 11:25 AM
Posted 17 April 2006 - 11:34 AM
Posted 17 April 2006 - 11:39 AM
Two things to check for this.
1) Is the new drive jumpered as a slave? There are jumpers on the back of the drive that must be positioned properly to set the drives role in the machine. Most drives are jumpered as Master from the factory. Check the documentation that came with the drive for correct jumper settings.
2) Cable position. A slave drive must be connected to the center connector of the ribbon (cable). The end connector is for the Master drive.
Posted 19 April 2006 - 10:53 AM
Any other suggestions?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users