[soggyrice]

New motherboard: ASRock939 DualSATA2

I attached the front panel audio connectors to the connector on my board. Yes, they are wired correctly.

The front panel audio only seems to work when I use the AC'97 sound. When I put my Audigy2 ZS in...It will only emit sounds through the headphone. There are a pair of jumpers right next to the audio connector on the mobo that control if the front/rear audio connectors should be operation labeled JL1,JR1 I believe. I've been messing around with these jumpers for the past hour trying to see what would work.

Can I do anything about it to make the front audio port work with my SB Audigy2?

[Advertisements]

I suggest referring to your motherboard manual for instructions on the jumpers.

[austin_o]

I suggest referring to your motherboard manual for instructions on the jumpers.

[Neil Jones]

Front Panel audio is usually tied to the onboard sound and unless the separate sound card has appropriate standoffs on it to accommodate front panel audio (quite a lot of them don't) then there's not a lot you can really do about it, unfortunately.