Here are the issues:
The PC recognizes the Drives and HDD (I see them in the Mobo setup) but will not boot from either
There is an error message saying it could not load Bios since there are no hard drives attached.
Can you help?
New Build Problems
Started by
Chuxmad
, Oct 03 2006 02:04 PM
#1
Posted 03 October 2006 - 02:04 PM
Chuxmad
-
- Member
-
- 2 posts
New Member
Here are the issues:
The PC recognizes the Drives and HDD (I see them in the Mobo setup) but will not boot from either
There is an error message saying it could not load Bios since there are no hard drives attached.
Can you help?
#2
Posted 06 October 2006 - 01:16 AM
racinmason001
-
- Member
-
- 195 posts
Member
have you formatted the drives?
#3
Posted 06 October 2006 - 08:36 AM
Chuxmad
- Topic Starter
-
- Member
-
- 2 posts
New Member
I have formatted the new SATA drive in another computer and also tried a boot with an IDE HD that has windows XP already installed neither works.
It goes right to the setup screen. I have also tried a jumper reset numerous times, boot disks for the 3.5 and CD and still the system won't read. It knows the devices are there....it just woun't read from them.
It goes right to the setup screen. I have also tried a jumper reset numerous times, boot disks for the 3.5 and CD and still the system won't read. It knows the devices are there....it just woun't read from them.
#4
Posted 09 October 2006 - 01:52 PM
SRX660
-
- Technician
-
- 4,345 posts
motto - Just get-er-done
I had a intel D101G MB that was doing the same. I needed to load the drivers from the MB utilities CD before it would install windows on the IDE drive.
SRX660
SRX660
Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
As Featured On:
Sign In
Create Account
