Motherboard screws?
Started by
mozzer11
, Jan 25 2007 10:22 PM
#1
Posted 25 January 2007 - 10:22 PM
#2
Posted 26 January 2007 - 12:40 AM
Hi mozzer11...
So long as you used standoffs, you should be fine.
wannabe1
So long as you used standoffs, you should be fine.
wannabe1
#3
Posted 26 January 2007 - 05:05 PM
Hi
Yea I used standoffs, or should I say A standoff as there is only one hole. The rest of the holes are raised in the case. Do they act as standoffs? They're part of the case.
Yea I used standoffs, or should I say A standoff as there is only one hole. The rest of the holes are raised in the case. Do they act as standoffs? They're part of the case.
#4
Posted 28 January 2007 - 05:04 AM
If the holes are raised on the backing plate, they will be standard ones that you find on 99.9% of all ATX/microATX motherboards and they do act as standoffs.
Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users