The Problem My PC is running but my moniter displays a messgae ' NO Signal Received'
I have definatly reattached all the wire's in the correct order etc. but to no avail
The Reason- Perhaps
My PC has been running very slowly recently & also freezing for no apparent reason
I got some advice from a guy who works within my group of companys that part of the problem may be that dust could be causing my PC to freeze to save it overheating & that I would be best clearing out the dust
So off I went with a screwdriver & the Dyson
I removed the side panal of the CPU, I cant stress how carefull I was, got the Dyson out & removed all the dust from the grill, fan etc.
The only componet I touched was the Fan itself, I removed it from its housing (I did not remove any wires at all) vaccumed it & placed the Fan back in place & locked the clips down, replaced the side panel & re-attached all the leads & ended up with the problem as mentioned above
I am now without a home PC & have to do this plea from work
Thanks for you help in advance
ps - I which I found this site 2 days ago
Edited by Bolt- 10, 07 February 2007 - 05:34 AM.