I am facing a problem in writing a cd on my compaq laptop..I have attached the log which is generated through NERO ..can any one help me out here..Thanks in advance
1C82-0000-19E5-MAAX-4003-3868-****
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero Version: 7.5.7.0
Internal Version: 7, 5, 7, 0
(Nero Express)
Recorder: <HL-DT-ST RW/DVD GCC-4240N>Version: 0110 - HA 1 TA 0 - 7.5.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST RW/DVD GCC-4240N>Version: 0110 - HA 1 TA 0 - 7.5.7.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23DA-30 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4240N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4240N D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
BUFE : 0
Physical memory : 478MB (490480kB)
Free physical memory: 143MB (146972kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.2.2007
CD-ROM (ISO)
19:52:37 #1 Text 0 File SCSIPassThrough.cpp, Line 583
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
19:52:37 #2 Text 0 File Isodoc.cpp, Line 6508
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
19:52:38 #3 Text 0 File Burncd.cpp, Line 3133
HL-DT-ST RW/DVD GCC-4240N
Buffer underrun protection activated
19:52:38 #4 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
19:52:38 #5 Text 0 File Burncd.cpp, Line 3435
Turn on Track-At-Once, using CD-R/RW media
19:52:38 #6 Text 0 File DlgWaitCD.cpp, Line 301
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 249738 ( 55:31.63)
19:52:38 #7 Text 0 File DlgWaitCD.cpp, Line 313
Write in overburning mode: NO (enabled: CD)
19:52:38 #8 Text 0 File DlgWaitCD.cpp, Line 2863
Recorder: HL-DT-ST RW/DVD GCC-4240N;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
19:52:38 #9 Text 0 File DlgWaitCD.cpp, Line 485
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19:52:38 #10 Text 0 File ThreadedTransferInterface.cpp, Line 820
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 249739 (249739) = #249739/55:29.64
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 249737 blocks [Main]
--------------------------------------------------------------
19:52:39 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1033
Prepare recorder [HL-DT-ST RW/DVD GCC-4240N] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 511772672, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 249739 | -150 | 0x00
0 | 1 | 1 | 0x41 | 249739 | 0 | 0x00
249739 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
19:52:39 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1104
Removed 2 run-out blocks from end of track 1. Length: 249739 -> 249737.
19:52:39 #13 Text 0 File SCSIPassThrough.cpp, Line 41
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
19:52:39 #14 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started
19:52:39 #15 Text 0 File Burncd.cpp, Line 4262
Cache writing successful.
19:52:39 #16 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed
19:52:39 #17 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 10x (1,500 KB/s)
19:52:39 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2730
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
19:52:39 #19 Text 0 File MMC.cpp, Line 22124
Set BUFE: Buffer underrun protection -> ON
19:52:58 #20 SPTI -1135 File SCSIPassThrough.cpp, Line 293
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 1B 80 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x04d67a00: Len x10000
0xA4 4B 9D AE 8C EA 59 ED 19 CB C7 5F 1F 4E F3 D5
0xBD C8 3A D6 AF 40 F6 07 90 83 36 D2 74 42 4A F8
0xCD 25 54 74 89 1E 93 C8 AD E3 8E 9D 5E D2 A9 78
19:52:58 #21 CDR -1135 File Writer.cpp, Line 278
Write error
D: HL-DT-ST RW/DVD GCC-4240N
19:52:58 #22 CDR -201 File WriterStatus.cpp, Line 194
Invalid write state
D: HL-DT-ST RW/DVD GCC-4240N
19:52:58 #23 TRANSFER -18 File WriterStatus.cpp, Line 194
Could not perform EndTrack
19:52:58 #24 Text 0 File MMC.cpp, Line 16956
<HL-DT-STRW/DVD GCC-4240N> start Close Session
19:52:59 #25 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 10x (1,500 KB/s)
19:52:59 #26 Text 0 File Cdrdrv.cpp, Line 10459
DriveLocker: UnLockVolume completed
19:52:59 #27 Text 0 File SCSIPassThrough.cpp, Line 583
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 23:07:32
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Edited by OSS, 19 February 2007 - 09:38 AM.
Sign In
Create Account
