Edited by bigdog1100, 12 August 2007 - 02:55 PM.
Nero or any other DVD burning software can't burn DVD's
Started by
bigdog1100
, Aug 12 2007 02:53 PM
#1
Posted 12 August 2007 - 02:53 PM
#2
Posted 16 August 2007 - 11:16 AM
Can you check DMA is enabled for the drive
The drive has the latest firmware
You have the latest version of Nero
Use a slower write speed
The drive has the latest firmware
You have the latest version of Nero
Use a slower write speed
#3
Posted 16 August 2007 - 01:09 PM
I don't have means of checking for DMA. Any suggestions? Please note, I don't have advanced settings tab on one and only IDE Controller that my PC has.
Edited by bigdog1100, 16 August 2007 - 01:17 PM.
#4
Posted 17 August 2007 - 02:03 AM
Check it with this, though the Nero info tool should show if DMA is enabled
http://www.blackmaxp.../Enable_DMA.htm
http://www.blackmaxp.../Enable_DMA.htm
#5
Posted 17 August 2007 - 08:26 AM
Nero Info Tool showed DMA on and Autorun On. I also suspect that this is DVD movie mode burning problem only, and not DVD data burning problem. I think I've made experiment in burning Data successfully about six months ago but forgot. I will try to do it tonight. I do have the latest Nero 6.x. I belive Nero 7 is not free. I will also see if there is a driver update for my DVD drive.
#6
Posted 17 August 2007 - 07:35 PM
Update. Just burned 4.38 gig of random large and small media files with no problem at full 8x speed. Is it possible that after burening it can't write lead out? Or is it something with soeftware? I will now attempt to update driver and burn DVD for DVD player.
#7
Posted 18 August 2007 - 01:43 PM
Ok here is update. After unuastalling Nero 6 completely, and downloading/installing Nero 7 (which turned out to be a trial ) I was successful in burning Data DVD and today I was able to burn VOB file through "Make Your Own DVD-Video". However, when I tried to use DVD shrink to back up one of my DVDs, it didn't even start burning. And then I tried to use Nero's "Burn-DVD Video Files" mode to burn all those DVD files that DVD shrink stored into it's temp folder. Keep in mind I was using half the speed that my PIONEER DVR-107D is capable of. So, it was burning, and burning, and then at the very end (which is always where the error occurres) I get this error message, "Could not perform End-of-Disk at once" Looks like it won't do lead out when burning DVDs in copying DVDs or DVD files mode. I hope I am being clear in my explanation. Also, I did find one firmware update for DVD drive, but when I click on exe file it says that "Available target is not found". I will be awaiting your response. Thank you.
#8
Posted 18 August 2007 - 02:25 PM
If you have the serial number for 6 you can get that from Nero or oldversion.com
Load a vob file in to Nero - make dvd
Click export at the bottom, click configure and check it is set to 2 passes and standard play
It will go to nerovision - exported video
Convert enough for 4.37GB and then use Nero - make dvd - add video files, you can rename the files if you need to
Try burning a disc
Load a vob file in to Nero - make dvd
Click export at the bottom, click configure and check it is set to 2 passes and standard play
It will go to nerovision - exported video
Convert enough for 4.37GB and then use Nero - make dvd - add video files, you can rename the files if you need to
Try burning a disc
#9
Posted 19 August 2007 - 07:18 AM
Done. DVD burned successfully. What's next.
#10
Posted 19 August 2007 - 07:28 AM
You could try some more the same way
You could try transcoding AVI - MPEG files directly with Nero
If those burn properly then it is one of the other applications
You could try transcoding AVI - MPEG files directly with Nero
If those burn properly then it is one of the other applications
#11
Posted 19 August 2007 - 09:05 AM
Ok. I've tried before and it worked. So I assert that it is software conflict. Now. What are the troubleshooting steps to determine that? ANd why when I copy DVD, it won't do lead out. Like, it does everything until the very end and then shows error.
Edited by bigdog1100, 19 August 2007 - 09:07 AM.
#12
Posted 20 August 2007 - 12:58 PM
Please advise what will be my next step. Thank you.
#13
Posted 20 August 2007 - 03:09 PM
You could start with re-installing the freebie programmes
Consider whether you have to use them
If you do, then burning them with Nero is probably only going to work as per post 8
Consider whether you have to use them
If you do, then burning them with Nero is probably only going to work as per post 8
#14
Posted 21 August 2007 - 01:32 PM
I got my Nero 7 registered. I was trying to burn DVD, but the same result. Is there a way to identify what is wrong without uninstalling a whole bunch of software? Also, is there a way that I can save to file the information about my registry and or programs installed so that you or someone else from geekstogo could see where the conflict is?
Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users