Edited by Charliee03, 21 February 2008 - 10:36 PM.
My computer has recently decided its never going to shut down ever aga
#1
Posted 21 February 2008 - 10:34 PM
#2
Posted 22 February 2008 - 12:28 AM
and install..
When you do, open it and look on the left for a button that says registry.
Click it, and on the bottom right click analyze.. wait for it analyze your registry for problems.
When it finishes, fix all of your problems, and see if that helps you.
#3
Posted 22 February 2008 - 06:28 PM
Open a command prompt (Click Start then Run, type cmd and press Enter or click OK).
Type shutdown -s and press Enter
Does anything happen? Do you get any error messages?
Also, look in Event Viewer and see if any errors are being logged (they will be in RED)
Click Start then Run, type eventvwr.msc and press Enter or click OK
Look in all three categories listed on the left. Double click on any error to look at the details. Use the arrows to move up and down in the events listed.
#5
Posted 22 February 2008 - 07:37 PM
Download Ccleaner from http://www.filehippo..._ccleaner/3708/
and install..
When you do, open it and look on the left for a button that says registry.
Click it, and on the bottom right click analyze.. wait for it analyze your registry for problems.
When it finishes, fix all of your problems, and see if that helps you.
I have the program already, ran the registry scanner fixed all problems, and hasn't fixed a thing, also scanned my PC with Tune Up Utilities 2008 Registry hasn't fix a thing, and PC Tools Registry Mechanic.. All three failed to solve this problem.
Charliee03, before you run a registry cleaner, try this:
Open a command prompt (Click Start then Run, type cmd and press Enter or click OK).
Type shutdown -s and press Enter
Does anything happen? Do you get any error messages?
Also, look in Event Viewer and see if any errors are being logged (they will be in RED)
Click Start then Run, type eventvwr.msc and press Enter or click OK
Look in all three categories listed on the left. Double click on any error to look at the details. Use the arrows to move up and down in the events listed.
I tried the command shutdown -s, and a small box says Your system will shutdown in (with a countdown) .. it counted all the way down and didn't shut down.
I went into Event Viewer, under system it shows about 100+ errors from janaury to this month .. How do I fix these?
Edited by Charliee03, 22 February 2008 - 07:43 PM.
#6
Posted 22 February 2008 - 07:54 PM
If not then you can copy details from some/all of the Event Viewer errors and paste them into notepad, then use the Browse and Upload buttons below the text input area to upload the file here for us to look at. If you need more detailed instructions to do this please ask and I'll be happy to provide them.
#7
Posted 23 February 2008 - 03:32 AM
Please go here to read the entire article.This error occurs if drivers do not handle power state transition requests properly, usually during one of the following procedures: • Shutting down
• Suspending or resuming from Standby mode
• Suspending or resuming from hibernation
Back to the top
RESOLUTION
To resolve the error and prevent the error from recurring, update or remove the offending driver. This error can occur because of a device driver, but it can also occur because of a file system filter driver (for example, a driver that is installed by an antivirus, remote control, or backup program).
To isolate the driver that is causing the error, follow these steps: 1. Check to make sure that your computer and all installed devices are on the Hardware Compatibility List (HCL). You can view the HCL at the following Microsoft Web site:
http://www.microsoft...cl/default.mspx (http://www.microsoft...cl/default.mspx)
2. Check for drivers that are not designed for use with Windows. You can use the Sigverif.exe tool to do this. For information about how to use the Sigverif tool, refer to the following article in the Microsoft Knowledge Base:
308514 (http://support.micro...b/308514/EN-US/) HOW TO: Verify Unsigned Device Drivers in Windows XP
3. Check for driver updates that may be available for your hardware.
4. Update any software that uses filter drivers (for example, antivirus, remote control, and backup software).
5. Remove any non-critical devices and software to help isolate the device or software that is causing the error.
6. Install Windows in a new folder. Add drivers one by one, and restart the computer after each addition, to try to locate the driver that is causing the error.
Back to the top
Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users