Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works
Photo

laptop will not boot


  • Please log in to reply

#1
dennisk

dennisk

    Member

  • Member
  • PipPip
  • 11 posts
My Dell laptop was running fine when I was going to make a CD using Roxio Easy Media Creator. When I tried to start the program, it came up with "trial period ended". This program is the full program and not a trial or partial program. This has happened before on my desktop and I unloaded and reloaded the program with no problems. This time, with the laptop, I unloaded the program and was told to exit the drag to disk function, which I did. The program was then unloaded. I then proceeded to unload the drag to disk function. I was then instructed to reboot the computer now or later. I chose later. I then exited the control panel and proceeded to reboot. At reboot, it powered-up and then the screen indicated a problem and offered several methods to continue such as continue to boot in the normal method, safe or to a recover. None of them would work and the computer continued to reboot with the same offerings continuously. I tried to boot with a bootable disk to try and recover but it won't let me do that and will not boot off the disk. It just goes back to that same error selection. I even tried to get into my system setup but it was frozen and would not let me in. WHAT IS HAPPENING? And, from the looks of preceding posts, I'm not alone. My computer is a Dell 8100. Thanks, Dennis
  • 0

Advertisements


#2
happyrock

happyrock

    Tech Moderator

  • Retired Staff
  • 9,285 posts
This article describes how to perform an in-place upgrade (reinstallation) of Windows XP. This is also named a repair installation. It reinstalls Windows XP to the same folder. You may want to perform an in-place upgrade if your installation of Windows XP must be repaired. Such a repair installation may be required if one of the following conditions is true:
• You cannot start Windows XP in safe mode.
the lowdown is here and here...

Edited by happyrck, 28 February 2008 - 05:10 PM.

  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP