It shows my AGP voltage at 1.75, which seems an odd number to me. this is what it defaults to...
I have an ATI X850XT video card, but the voltage was the same when I used a visiontek 9600XT card. both are AGP 8x. in BIOS I have it set to AGP 8x.
on the site for the mobo, it lists that it supports AGP 8x (at 0.8V), and AGP 4x (at 1.5V). so, the higher number again seems odd.
I am not having any performance issues, and if I turn the AGP voltage down through the corecell program to 1.5V, I do not notice any difference...
So, is there anything I should be worried about here? I am mostly wondering if by leaving it at 1.75V, if that will burn out the card sooner, over time.
Edited by audioboy, 27 April 2005 - 04:24 PM.