[rumibudz]

There is nothing left in the folder

[Advertisements]

Hello.. I'm not sure how to get it back... You could try one software below (but its not cheap though..)

Runtime's GetBack Data for NTFS > http://www.runtime.o...ry-software.htm


Important note about GetBack Data

Do not install GetDataBack on the drive you want to recover! It is strongly recommended to proceed as follows:

Install the program to another computer, which doesn't have any problems. If you have a choice, choose the computer with the most RAM and is the fastest. Attach the drive you want to recover as a slave to this machine. Make sure the drive is jumpered correctly and is recognized by the BIOS.

After downloading GetDataBack run the setup.exe. The setup Wizard will guide you through the installation process.

NEW: If there is no way to attach the drive to an extra computer, you can run GetDataBack from a WinPE boot CD-ROM

Edited by fenzodahl512, 18 July 2008 - 09:35 AM.

[fenzodahl512]

Hello.. I'm not sure how to get it back... You could try one software below (but its not cheap though..)

Runtime's GetBack Data for NTFS > http://www.runtime.o...ry-software.htm


Important note about GetBack Data

Do not install GetDataBack on the drive you want to recover! It is strongly recommended to proceed as follows:

Install the program to another computer, which doesn't have any problems. If you have a choice, choose the computer with the most RAM and is the fastest. Attach the drive you want to recover as a slave to this machine. Make sure the drive is jumpered correctly and is recognized by the BIOS.

After downloading GetDataBack run the setup.exe. The setup Wizard will guide you through the installation process.

NEW: If there is no way to attach the drive to an extra computer, you can run GetDataBack from a WinPE boot CD-ROM

Edited by fenzodahl512, 18 July 2008 - 09:35 AM.

[fenzodahl512]

Hello.. I need to see your Environment Variables inside your computer.. Please do the following..


Please copy (Control+C) and paste (Control+V) the following code into the Notepad.

REGEDIT /E "%USERPROFILE%\Desktop\result1.txt" "HKEY_CURRENT_USER\Environment"
REGEDIT /E "%USERPROFILE%\Desktop\result2.txt" "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment"

Save it in Desktop as peek.bat and in Save as type: choose All Files

A new batch file (peek.bat) will then created on your Desktop. Just double-click the file. A window will open and suddenly close, this is normal.


Two textfiles (result1.txt and result2.txt) will be created on your Desktop. Please post the content of result1.txt and result2.txt in your next reply


If you do not sure how to make a batch file, please visit HERE for the tutorial.

[rumibudz]

hi again,

i am having the same trouble as before, i was able to create the peek.bat file, but it doesn't generate the two text file you mentioned on the desktop. sorry for all the trouble.


thanks

[fenzodahl512]

hi again,

i am having the same trouble as before, i was able to create the peek.bat file, but it doesn't generate the two text file you mentioned on the desktop. sorry for all the trouble.


thanks

Ok.. delete peek.bat file from your computer.. Repeat the peek.bat steps before but this time use below code instead..

REGEDIT /E "C:\result1.txt" "HKEY_CURRENT_USER\Environment"
REGEDIT /E "C:\result2.txt" "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment"

Now, please find result1.txt and also result2.txt at your C:\ drive and post its content here..


Regards
fenzodahl512

[rumibudz]

sorry, nothing is being created in the c: drive neither

[rumibudz]

i put those separately into run and here is what i got:

result 1

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Environment]

Result 2

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment]
"OS"="Windows_NT"
"PROCESSOR_ARCHITECTURE"="x86"
"PROCESSOR_LEVEL"="6"
"PROCESSOR_IDENTIFIER"="x86 Family 6 Model 9 Stepping 5, GenuineIntel"
"PROCESSOR_REVISION"="0905"
"NUMBER_OF_PROCESSORS"="1"
"comspec"=hex(2):25,00,73,00,79,00,73,00,74,00,65,00,6d,00,72,00,6f,00,6f,00,\
74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,63,\
00,6d,00,64,00,2e,00,65,00,78,00,65,00,00,00

[fenzodahl512]

Hello, I'm afraid I have no definite way to recover your files.. The best bet is to use the program I suggest you before..


Somehow, your Environment Variables is a mess.. What I'm doing now is to repair your Environment Variables so you'll not have this kind of trouble in future..


Please do the following...


The steps that I am about to suggest involve modifying the registry. Modfying the registry can be dangerous so we will make a backup of the registry first.
Modification of the registry can be EXTREMELY dangerous if you do not know exactly what you are doing so follow the steps that are listed below EXACTLY. if you cannot perform some of these steps or if you have ANY questions please ask BEFORE proceeding.

Backing Up Your Registry

• Go Here and download ERUNT
  (ERUNT (Emergency Recovery Utility NT) is a free program that allows you to keep a complete backup of your registry and restore it when needed.)
• Install ERUNT by following the prompts
  (use the default install settings but say no to the portion that asks you to add ERUNT to the start-up folder, if you like you can enable this option later)
• Start ERUNT
  (either by double clicking on the desktop icon or choosing to start the program at the end of the setup)
• Choose a location for the backup
  (the default location is C:\WINDOWS\ERDNT which is acceptable).
• Make sure that at least the first two check boxes are ticked
• Press OK
• Press YES to create the folder.

For detailed instruction on how to back-up registry via ERUNT, please visit HERE




NEXT


Please copy and paste the following into a Notepad

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Environment]
"TEMP"=hex(2):25,00,55,00,53,00,45,00,52,00,50,00,52,00,4f,00,46,00,49,00,4c,\
  00,45,00,25,00,5c,00,4c,00,6f,00,63,00,61,00,6c,00,20,00,53,00,65,00,74,00,\
  74,00,69,00,6e,00,67,00,73,00,5c,00,54,00,65,00,6d,00,70,00,00,00
"TMP"=hex(2):25,00,55,00,53,00,45,00,52,00,50,00,52,00,4f,00,46,00,49,00,4c,00,\
  45,00,25,00,5c,00,4c,00,6f,00,63,00,61,00,6c,00,20,00,53,00,65,00,74,00,74,\
  00,69,00,6e,00,67,00,73,00,5c,00,54,00,65,00,6d,00,70,00,00,00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment]
"ComSpec"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
  74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,63,\
  00,6d,00,64,00,2e,00,65,00,78,00,65,00,00,00
"Path"=hex(2):25,00,73,00,79,00,73,00,74,00,65,00,6D,00,\
  72,00,6F,00,6F,00,74,00,25,00,5C,00,73,00,79,00,73,00,74,00,65,00,6D,00,\
  33,00,32,00,3B,00,25,00,73,00,79,00,73,00,74,00,65,00,6D,00,72,00,6F,00,\
  6F,00,74,00,25,00,3B,00,25,00,73,00,79,00,73,00,74,00,65,00,6D,00,72,00,\
  6F,00,6F,00,74,00,25,00,5C,00,73,00,79,00,73,00,74,00,65,00,6D,00,33,00,\
  32,00,5C,00,77,00,62,00,65,00,6D,00,00,00
"windir"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
  00,25,00,00,00
"FP_NO_HOST_CHECK"="NO"
"OS"="Windows_NT"
"PROCESSOR_ARCHITECTURE"="x86"
"PROCESSOR_LEVEL"="6"
"PROCESSOR_IDENTIFIER"="x86 Family 6 Model 9 Stepping 5, GenuineIntel"
"PROCESSOR_REVISION"="0905"
"NUMBER_OF_PROCESSORS"="1"
"PATHEXT"=".COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH"
"TEMP"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
  00,25,00,5c,00,54,00,45,00,4d,00,50,00,00,00
"TMP"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,\
  25,00,5c,00,54,00,45,00,4d,00,50,00,00,00

Save it in desktop as Fix.reg and in Save as type: choose All Files

A new registry file will then created on your desktop. It should look like this:

Just double-click the file and choose Yes at prompt.

If you do not sure how to make a registry file, please visit HERE for the tutorial.




NEXT


Please repeat the peek.bat step and post the fresh result1.txt and result2.txt for me..


Regards
fenzodahl512

[rumibudz]

result 1

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Environment]
"TEMP"=hex(2):25,00,55,00,53,00,45,00,52,00,50,00,52,00,4f,00,46,00,49,00,4c,\
00,45,00,25,00,5c,00,4c,00,6f,00,63,00,61,00,6c,00,20,00,53,00,65,00,74,00,\
74,00,69,00,6e,00,67,00,73,00,5c,00,54,00,65,00,6d,00,70,00,00,00
"TMP"=hex(2):25,00,55,00,53,00,45,00,52,00,50,00,52,00,4f,00,46,00,49,00,4c,00,\
45,00,25,00,5c,00,4c,00,6f,00,63,00,61,00,6c,00,20,00,53,00,65,00,74,00,74,\
00,69,00,6e,00,67,00,73,00,5c,00,54,00,65,00,6d,00,70,00,00,00


result 2
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment]
"OS"="Windows_NT"
"PROCESSOR_ARCHITECTURE"="x86"
"PROCESSOR_LEVEL"="6"
"PROCESSOR_IDENTIFIER"="x86 Family 6 Model 9 Stepping 5, GenuineIntel"
"PROCESSOR_REVISION"="0905"
"NUMBER_OF_PROCESSORS"="1"
"comspec"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,63,\
00,6d,00,64,00,2e,00,65,00,78,00,65,00,00,00
"Path"=hex(2):25,00,73,00,79,00,73,00,74,00,65,00,6d,00,72,00,6f,00,6f,00,74,\
00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,3b,00,25,00,\
73,00,79,00,73,00,74,00,65,00,6d,00,72,00,6f,00,6f,00,74,00,25,00,3b,00,25,\
00,73,00,79,00,73,00,74,00,65,00,6d,00,72,00,6f,00,6f,00,74,00,25,00,5c,00,\
73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,77,00,62,00,65,00,6d,\
00,00,00
"windir"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
00,25,00,00,00
"FP_NO_HOST_CHECK"="NO"
"PATHEXT"=".COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH"
"TEMP"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
00,25,00,5c,00,54,00,45,00,4d,00,50,00,00,00
"TMP"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,\
25,00,5c,00,54,00,45,00,4d,00,50,00,00,00

Ya, is fine if the files are gone, thanks for your help

[fenzodahl512]

All right.. If there's nothing else, you are good to go

[rumibudz]

i just want to thank you for the help again

[fenzodahl512]

Since this issue appears to be resolved ... this Topic has been closed. Glad we could help.

If you're the topic starter, and need this topic reopened, please contact a staff member with the address of the thread.

Everyone else please begin a New Topic.