Help with DVD Burner
Started by
tiberio
, Oct 07 2008 08:18 PM
#1
Posted 07 October 2008 - 08:18 PM
#2
Posted 08 October 2008 - 08:50 AM
Could be the drive doesn't like the brand of media you are using or it could be that the laser is dirty/failing....
#3
Posted 08 October 2008 - 12:50 PM
Hi tiberio, good day.
I think this could be a hardware or driver issues. What burning program that you installed?
Ok try the following steps below:
1. Remove device first and then turn ON your computer.
2. Shutdown your computer and replug the device again,
This should fix your issue. Post back for the result.
Thanks and God bless.
I think this could be a hardware or driver issues. What burning program that you installed?
Ok try the following steps below:
1. Remove device first and then turn ON your computer.
2. Shutdown your computer and replug the device again,
This should fix your issue. Post back for the result.
Thanks and God bless.
Edited by SHENGTON, 08 October 2008 - 12:51 PM.
#4
Posted 08 October 2008 - 05:05 PM
SHENGTON, no luck using your suggestion. Here is exactly what happens. When I connect my burner, it shows up as DVD-RW drive. As soon as i put a blank disc in, the icon changes to CD drive. Then when I click on it, a small window appears stating "E is not accessible. Incorrect function."
I am not using any burning programs. I'm just right clicking on the files I want burned and that is it.
I am not using any burning programs. I'm just right clicking on the files I want burned and that is it.
#5
Posted 08 October 2008 - 09:12 PM
Ok try this:
1. Right-Click on E: drive -> Properties -> Recording Tab
2. Check the "Enable CD Recording On This Drive" box.
1. Right-Click on E: drive -> Properties -> Recording Tab
2. Check the "Enable CD Recording On This Drive" box.
Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users