Memtest86+ is a comprehensive, stand-alone memory diagnostic tool. Basically, you need to put it to a diskette or cd to install the tool which will be later used to boot your computer and then perform the test....get it
herefor floppy get the
6th one down...
Download - Pre-Compiled package for Floppy (DOS - Win)for the cd version get the
8th one down...
Download - Pre-Compiled Bootable ISO (.zip)There are two ways to run Memtest86....
1. Using a floppy diskette.
Download Memtest86 then save it to your desktop.
Once download completes,
right-click on memtest.zip
In the left hand column, click "Extract all Files". The Extraction Wizard will open.
Click Next, then extract to Desktop so you can easily locate it later.
Click ok.
Now to install the utility on a diskette.
Double-click on
install.bat then follow the promps to create the bootable diskette.
Boot computer via floppy disk.
Once loaded, the test will automatically run itself.
let it run for at least 3 hours then note any error/messages you receive ...it will run until you press the ESC key
2. Using a cd.
Download Memtest86 then save it to your desktop.
Once download completes, right-click on memtest.iso.zip.
In the left hand column, click "Extract all Files". The Extraction Wizard will open.
Click Next, then extract to Desktop so you can easily locate it later.
Click ok.
Now "burn image" (memtest.iso) to a cd using Nero or any burning program you have that will burn .ISO files (image)
if you don't have a burning program that will burn .ISO files go
here and get burncdcc ..a small FAST no frills iso burning program...
NOTE...do not put a blank cd in until burncdcc opens the tray for you
1. Start BurnCDCC
2. Browse to the ISO file you want to burn on cd/dvd ....in this case its rc.iso
3. Select the ISO file
4. click on Start
make sure in the bios the cd drive is the first boot device....put the cd in the cd drive..boot your computer....
Set the bios to boot computer using the CD drive...or floppy first...depending which version of memtest you got...
the test will automatically run itself as soon as you boot up
let it run for at least 3 hours then note any error/messages you receive ...
it will run until you press the ESC key...if you want a thourogh test...let it run overnite...if you get
ANY ERRORS you will have to replace the ram