[zzooxx]

My Dell 8200 has gone to this screen before booting up after an install a year ago - not a big deal for me. However, after being away for the weekend an not using the computer for three days I turned it on and came to this scree as usual. However, F1 does not work. F2 does not work. In fact, there is only a fast cursor blinking.

I tried a different keyboard to make sure that was not the issue. It does not appear to be. I took a look inside but everything appears to be plugged in.

What can I do to bypass this and get my computer working again?? Any help or suggestions appreciated.

[Advertisements]

Hi zzooxx...welcome to Geeks To Go...

go here..download the following file: rc.iso....then run chkdsk /r
from the rc.iso cd...be sure the bios is set to boot from the cd drive first...

if you don't have a burning program that will burn .ISO files go here and get burncdcc ..a small FAST no frills iso burning program...

NOTE...do not put a blank cd in until burncdcc opens the tray for you
1. Start by clicking on BurnCDCC.exe
2. Browse to the ISO file you want to burn on cd/dvd ....in this case its rc.iso
3. Select the ISO file
4. click on Start

make sure in the bios the cd drive is the first boot device....put the cd in the cd drive..boot your computer....

boot from the rc.iso cd....
when you boot from rc.iso you will get a blue screen and it will say setup is loading files...
then it will say its starting windows...
you will get to a screen that says ...do you want to install windows or 2nd choice it to repair windows..
press r to repair...you will get to a ...C:\>.......this is where you type in chkdsk /r

type in chkdsk /r press enter
note the single space before the /

While chkdsk is running, you will see a light blue window with a dark blue band at the top and bottom. Chkdsk will display the specific stage it is checking as well as the percentage of completion of the stage. You cannot do anything else on your computer while chkdsk is running. When chkdsk is finished, it will automatically reboot your computer.
NOTE this can take a long time to complete..it may even appear to hang or get stuck at a certain % for a couple of hours...then complete...it may even back up and go over the same area...this is normal...let it run...there are 5 stages
DO NOT TURN OFF YOUR COMPUTER WHILE RUNNING CHKDSK or you can have severe problems...
nojoy...
boot from the cd again...
then type fixmbr press enter...reboot
no joy ....boot from the cd again...
type in fixboot press enter...reboot
nojoy...boot from the cd again...

Type in bootcfg /scan and press Enter

if it says total identified window installs: 1

Type in bootcfg /rebuild and press Enter...

It will identify your XP installation...type Y once you see this prompt.

You will be prompted to enter the load identifier...type in Microsoft XP Home Edition or Microsoft XP Professional depending on whichever version you have...press enter

You will be prompted to enter the load options...type in /fastdetect and press Enter

Type in exit and press Enter

remove the cd

Reboot

still no joy...
get memtest 86here ...this will test your memory...let it run for at least 2 hours...if you get any errors then the ram is bad and will have to be replaced...no errors after 2 hours.......then its probably good and we can try other things..
it will run until you press the escape key
the how to is here..

[happyrock]

Hi zzooxx...welcome to Geeks To Go...

go here..download the following file: rc.iso....then run chkdsk /r
from the rc.iso cd...be sure the bios is set to boot from the cd drive first...

if you don't have a burning program that will burn .ISO files go here and get burncdcc ..a small FAST no frills iso burning program...

NOTE...do not put a blank cd in until burncdcc opens the tray for you
1. Start by clicking on BurnCDCC.exe
2. Browse to the ISO file you want to burn on cd/dvd ....in this case its rc.iso
3. Select the ISO file
4. click on Start

make sure in the bios the cd drive is the first boot device....put the cd in the cd drive..boot your computer....

boot from the rc.iso cd....
when you boot from rc.iso you will get a blue screen and it will say setup is loading files...
then it will say its starting windows...
you will get to a screen that says ...do you want to install windows or 2nd choice it to repair windows..
press r to repair...you will get to a ...C:\>.......this is where you type in chkdsk /r

type in chkdsk /r press enter
note the single space before the /

While chkdsk is running, you will see a light blue window with a dark blue band at the top and bottom. Chkdsk will display the specific stage it is checking as well as the percentage of completion of the stage. You cannot do anything else on your computer while chkdsk is running. When chkdsk is finished, it will automatically reboot your computer.
NOTE this can take a long time to complete..it may even appear to hang or get stuck at a certain % for a couple of hours...then complete...it may even back up and go over the same area...this is normal...let it run...there are 5 stages
DO NOT TURN OFF YOUR COMPUTER WHILE RUNNING CHKDSK or you can have severe problems...
nojoy...
boot from the cd again...
then type fixmbr press enter...reboot
no joy ....boot from the cd again...
type in fixboot press enter...reboot
nojoy...boot from the cd again...

Type in bootcfg /scan and press Enter

if it says total identified window installs: 1

Type in bootcfg /rebuild and press Enter...

It will identify your XP installation...type Y once you see this prompt.

You will be prompted to enter the load identifier...type in Microsoft XP Home Edition or Microsoft XP Professional depending on whichever version you have...press enter

You will be prompted to enter the load options...type in /fastdetect and press Enter

Type in exit and press Enter

remove the cd

Reboot

still no joy...
get memtest 86here ...this will test your memory...let it run for at least 2 hours...if you get any errors then the ram is bad and will have to be replaced...no errors after 2 hours.......then its probably good and we can try other things..
it will run until you press the escape key
the how to is here..