[gneira]

Hello, sorry about my english.
i have a problem on my computer, everytime I turn it on, shows me a blue screen, that tells me about errors, like STOP 0X0000000, etc, and more numbers like this one.
I tried to starting up as a Safe mode, but still shows me the Blue Screen.
I installed last week RegCure, I think this software could broke my computer.
Any one can help me?
Thanks
German

[Advertisements]

Hi gneira ...welcome to Geeks To Go...
yep...registry cleaners are not recommended because they can ruin your registry...

go here..download the following file: rc.iso....then run chkdsk /r from the rc.iso cd...

if you don't have a burning program that will burn .ISO files go here and get burncdcc ..a small FAST no frills iso burning program...

NOTE...do not put a blank cd in until burncdcc opens the tray for you
1. Start by clicking on BurnCDCC.exe
2. Browse to the ISO file you want to burn on cd/dvd ....in this case its rc.iso
3. Select the ISO file
4. click on Start

make sure in the bios the cd drive is the first boot device....put the cd in the cd drive..boot your computer....


when you boot from rc.iso you will get a blue screen and it will say setup is loading files...
then it will say its starting windows...
you will get to a screen that says ...do you want to install windows or 2nd choice it to repair windows..
press r to repair...you will get to a ...C:\>.......this is where you type in chkdsk /r

type in chkdsk /r press enter
note the single space before the /

While chkdsk is running, you will see a black dos box... Chkdsk will display the specific stage it is checking as well as the percentage of completion of the stage. You cannot do anything else on your computer while chkdsk is running. When chkdsk is finished, it will automatically reboot your computer.

NOTE this can take a long time to complete..it may even appear to hang or get stuck at a certain % for a couple of hours...then complete...it may even back up and go over the same area...this is normal...let it run...there are 5 stages
DO NOT TURN OFF YOUR COMPUTER WHILE RUNNING CHKDSK or you can have severe problems...
remove the rc.iso cd and reboot...if it does not boot into windows

boot from the cd again...
then type fixmbr press enter...reboot
no joy ....boot from the cd again...
type in fixboot press enter...reboot
nojoy...boot from the cd again...

Type in bootcfg /scan and press enter

if it says total identified window installs: 1

Type in bootcfg /rebuild and press Enter...

It will identify your XP installation...type Y once you see this prompt.

You will be prompted to enter the load identifier...type in Microsoft XP Home Edition or Microsoft XP Professional depending on whichever version you have...press enter

You will be prompted to enter the load options...type in /fastdetect and press Enter

Type in exit and press Enter

remove the cd and Reboot

[happyrock]

Hi gneira ...welcome to Geeks To Go...
yep...registry cleaners are not recommended because they can ruin your registry...

go here..download the following file: rc.iso....then run chkdsk /r from the rc.iso cd...

if you don't have a burning program that will burn .ISO files go here and get burncdcc ..a small FAST no frills iso burning program...

NOTE...do not put a blank cd in until burncdcc opens the tray for you
1. Start by clicking on BurnCDCC.exe
2. Browse to the ISO file you want to burn on cd/dvd ....in this case its rc.iso
3. Select the ISO file
4. click on Start

make sure in the bios the cd drive is the first boot device....put the cd in the cd drive..boot your computer....


when you boot from rc.iso you will get a blue screen and it will say setup is loading files...
then it will say its starting windows...
you will get to a screen that says ...do you want to install windows or 2nd choice it to repair windows..
press r to repair...you will get to a ...C:\>.......this is where you type in chkdsk /r

type in chkdsk /r press enter
note the single space before the /

While chkdsk is running, you will see a black dos box... Chkdsk will display the specific stage it is checking as well as the percentage of completion of the stage. You cannot do anything else on your computer while chkdsk is running. When chkdsk is finished, it will automatically reboot your computer.

NOTE this can take a long time to complete..it may even appear to hang or get stuck at a certain % for a couple of hours...then complete...it may even back up and go over the same area...this is normal...let it run...there are 5 stages
DO NOT TURN OFF YOUR COMPUTER WHILE RUNNING CHKDSK or you can have severe problems...
remove the rc.iso cd and reboot...if it does not boot into windows

boot from the cd again...
then type fixmbr press enter...reboot
no joy ....boot from the cd again...
type in fixboot press enter...reboot
nojoy...boot from the cd again...

Type in bootcfg /scan and press enter

if it says total identified window installs: 1

Type in bootcfg /rebuild and press Enter...

It will identify your XP installation...type Y once you see this prompt.

You will be prompted to enter the load identifier...type in Microsoft XP Home Edition or Microsoft XP Professional depending on whichever version you have...press enter

You will be prompted to enter the load options...type in /fastdetect and press Enter

Type in exit and press Enter

remove the cd and Reboot

[gneira]

Hello Happyrock,

thanks so much for your response.
I did what you told me, but when I boot my computer from the CD I burned with the rc.iso, after "loading files and starting windows" I get again another Stop Error with diferent codes.
I didn't get to a screen that says ...do you want to install windows or 2nd choice it to repair windows.

Do you know what's happening?
thanks again
German

[happyrock]

lets make sure its not your memory going bad...get memtest +

here....
the lowdown is here..

if you have a floppy drive you can get the 6th one down ...set the bios to boot from the floppy drive A:

first...then the cd drive then the Hard drive C:
or you can get the 2nd one down and burn the ISO file to a cd and then boot it from the cd drive...

if you don't have a burning program that will burn .ISO files go

here and get burncdcc ..a small FAST no frills iso

burning program...

NOTE...do not put a blank cd in until burncdcc opens the tray for you
1. Start by clicking on BurnCDCC.exe
2. Browse to the ISO file you want to burn on cd/dvd ....in this case its memtest86.iso
3. Select the ISO file
4. click on Start

make sure in the bios the cd drive is the first boot device....put the cd in the cd drive..boot your computer....


let memtest run for at least 2 hours...if it starts showing any errors during that time then you will have

to replace the RAM...no errors after 2 hours just press Esc to end the tests and we will try some other

tests..