[datarunner]

Can you double check device manager and let me know what you have listed under Network Adaptors?

Regards

[Advertisements]

Yes:

1) NVIDIA nForce Networking controller and
2) Realtek 8185 Extensible 802.11b/g Wireless Device

[certificates]

Yes:

1) NVIDIA nForce Networking controller and
2) Realtek 8185 Extensible 802.11b/g Wireless Device

[datarunner]

Ok I'm assuming 2 things here:

Your out of range of the wireless router or
SSID broadcasting is turned of on the router

Trying logging into your router by typing 192.168.1.1 (I'm sure that's what Belkin is) into IE or Firefox and check your wireless broadcast settings.

Regards

[certificates]

It shouldn't be out of range because the two machines are currently side by side.

But when I type 192.168.2.1 in I get IE cannot display the web page. but it is trying to put http:// before it.

I can't stop it doing that.

I guess because it is not connected ?

[datarunner]

Sorry I meant do it from the one that does connect.

Regards

Edited by datarunner, 26 August 2009 - 11:14 AM.

[certificates]

OK, I can do that on this machine. What am I looking for ?

[certificates]

This is what comes up



Version Info
Firmware Version 5.00.12 (Annex A)
Boot Version 6.01.04.00
Hardware v5
Serial No. 200734D7501380


LAN Settings
LAN/WLAN MAC 00:1c:df:0a:34:58/
00:1c:df:0a:34:58
IP address 192.168.2.1
Subnet mask 255.255.255.0
DHCP Server Enabled
DHCP Clients num 99



Internet Settings
ADSL Status Connected
Data Rate Down/Up 5267Kb/604Kb
WAN MAC address 00:1c:df:0a:34:59
Connection Type PPPoA
Subnet mask 255.255.255.255
Wan IP 91.110.51.96
Default gateway 91.110.0.1
DNS Address 193.36.79.100
Features
UPnP Disabled
NAT Enabled
Firewall Enabled
Wireless Enabled
Mode Mixed (11b+11g)
ESSID Broadcast Enabled
SSID Belkin54g
Channel 13
Security Disabled

[datarunner]

Wireless Channel and SSID then Broadcast SSID has to be ticked

Regards

[certificates]

There is no option to tick, but two are marked as enabled which I guess is the same and the SSID is marked Belkin54g

[datarunner]

What is next to:

Broadcast SSID and
Protected mode

Regards

[certificates]

I guess that's this section


UPnP Disabled
NAT Enabled
Firewall Enabled
Wireless Enabled
Mode Mixed (11b+11g)
ESSID Broadcast Enabled
SSID Belkin54g
Channel 13
Security Disabled

[datarunner]

Whats the router model?

[certificates]

All it says on it is ADSL Wirelss modem router

It says VER 5000 on the bottom

[datarunner]

Does it state the model anywhere on the router screens?

[certificates]

Is this any help ?


Version Info
Firmware Version 5.00.12 (Annex A)
Boot Version 6.01.04.00
Hardware v5
Serial No. 200734D7501380