I cant get to the desktop. I want to save my data. I was wondering if purchasing the $20.00 recovery CDs available for purchase from the Acer site fix my problem?
problem signature reals corrupt file & CHKDSK shows corruption...
My 8 month old (64 bit) Acer laptop will not come up to a menu screen. I turn it on and it goes to Startup Repair screen. It searchs for problems, but then tells me it cant repair computer automatically.
I know very little about computers, but after a little research I am sharing the information below in hopes that some kind person can provide insight. Stupidly I had not Backed Up in quite a while and I cant get to a recovery point. Nor was I originally supplied with a CD. While computer dumb, I am pretty good at following tutorials.
..... Any and all help much appreciated!
X:\Windows\system32>chksdsk [/b](why not a C Prompt ?)
The type of the file system is NTFS
The volume is in use by another process. Chkdsk
Might report errors when no corruption is present
Volume label is PQSERVICE
WARNING: F parameter not specified.
Running CHKDSK in read-only mode.
CHKDSK is verifying files (stage 1 of 3)…
9 percent complete (8180 of 9088 file records processed)
Attribute list entry with type code 128 in file 8872 is corrupt
Deleted corrupt attribute list entry
With type 128 in file 8872
Attribute record (128.’’’) from file record segment 8938 is corrupt
Attribute record (128.’’’) from file record segment 8942 is corrupt
Attribute record (128.’’’) from file record segment 8958 is corrupt
Attribute record (128.’’’) from file record segment 8972 is corrupt
Attribute record (128.’’’) from file record segment 8992 is corrupt
Attribute record (128.’’’) from file record segment 9006 is corrupt
9088 file records processed
File Verification completed
10 percent complete. (1 of 6 large files processed)
File record segment 8938 is an orphan
File record segment 8942 is an orphan
File record segment 8958 is an orphan
File record segment 8972 is an orphan
File record segment 8992 is an orphan
6 Large files records processed.
File Record segment 9006 is an orphan.
Errors found. CHKDSK cannot continue in read-only mode.
The problem signatures are as follows:[/b
]Problem Event Name: startuprepairv2
Problem Signature 01: Auto Failover
Problem Signature 02: 6.0.6000.16386.6.0.6001.18000
Problem Signature 03: 6
Problem Signature 04: 720905 (this one varies each time)
Problem Signature 05: CorruptFile
Problem Signature 06: NoBootFailure
Problem Signature 07: 0
Problem Signature 08: 0
Problem Signature 09: unknown
Problem Signature 10: 1168
OS Version: 6.0.6000.20.0.256.1
Locate ID: 1033
F8 safemode sends me to Startup Repair/ System Recovery Options
Repair your computer …. same vicious cycle
Safemode…..same vicious cycle
Last known good configuration same vicious cycle
Start your computer normally….same vicious cycle
[b]Choose a recovery toolStartup repair Windows cannot repair this computer automatically.,,etc. I have not installed a camera, etc nothing lately
System Restore 1 , Restore wizard is already running.... 2. no restore points have been created
Windows Complete PC restore No Valid Backup founds
Windows Memory Diagnostic Tool Runs two tests…no problems detected
Command Prompt Administrator.X;\windows\system32\cmd.exe
[b]Diagnosis and repair details are as follows:
Last successful boot time: 9/1/2009 12:57:15 AM (GMT)
Number of repair attempts: 12
Session details
---------------------------
System Disk = \Device\Harddisk0
Windows directory = C:\Windows
AutoChk Run = 0
Number of root causes = 1
Test Performed:
---------------------------
Name: Check for updates
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Nme: System disk test
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Disk failure diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 421 ms
Test Performed:
---------------------------
Name: Disk metadata test
Result: Completed successfully. Error code = 0x0
Time taken = 16 ms
Test Performed:
---------------------------
Name: Target OS test
Result: Completed successfully. Error code = 0x0
Time taken = 109 ms
Test Performed:
---------------------------
Name: Volume content check
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Boot manager diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: System boot log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Event log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 16 ms
Test Performed:
---------------------------
Name: Internal state check
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Root cause found:
---------------------------
Startup Repair has tried several times but still cannot determine the cause of the problem
Sign In
Create Account
