How full is the hard drive?
lsass.exe application error
Started by
lewism
, Oct 24 2009 09:26 PM
#16
Posted 28 October 2009 - 01:15 PM
How full is the hard drive?
#17
Posted 28 October 2009 - 01:17 PM
about 90 gig free, and 768mb (512 + 256). Never had a memory issue before...
#18
Posted 28 October 2009 - 01:26 PM
I'm as smart, as you're, right now.
We need more testing (totally messed up Windows installation, power supply, RAM, hard drive).
Run hard drive diagnostics: http://www.tacktech....ay.cfm?ttid=287
Make sure, you select tool, which is appropriate for the brand of your hard drive.
Depending on the program, it'll create bootable floppy, or bootable CD.
If downloaded file is of .iso type, use ImgBurn: http://www.imgburn.com/ to burn .iso file to a CD (select "Write image file to disc" option), and make the CD bootable.
NOTE. If your hard drive is made by Toshiba, unfortunately, you're out of luck, because Toshiba doesn't provide any diagnostic tool.
======================================================================================================
A. If you have more than one RAM module installed, try starting computer with one RAM stick at a time.
NOTE Keep in mind, the manual check listed above is always superior to the software check, listed below. DO NOT proceed with memtest, if you can go with option A
B. If you have only one RAM stick installed...
...run memtest...
1. Download - Pre-Compiled Bootable ISO (.zip)
2. Unzip downloaded memtest86+-2.11.iso.zip file.
3. Inside, you'll find memtest86+-2.11.iso file.
4. Download, and install ImgBurn: http://www.imgburn.com/
5. Insert blank CD into your CD drive.
6. Open ImgBurn, and click on Write image file to disc
7. Click on Browse for a file... icon:
8. Locate memtest86+-2.11.iso file, and click Open button.
9. Click on ImgBurn green arrow to start burning bootable memtest86 CD:
10. Once the CD is created, boot from it, and memtest will automatically start to run.
The running program will look something like this depending on the size and number of ram modules installed:
It's recommended to run 5-6 passes. Each pass contains very same 8 tests.
This will show the progress of the test. It can take a while. Be patient, or leave it running overnight.
The following image is the test results area:
The most important item here is the “errors” line. If you see ANY errors, even one, most likely, you have bad RAM.
We need more testing (totally messed up Windows installation, power supply, RAM, hard drive).
Run hard drive diagnostics: http://www.tacktech....ay.cfm?ttid=287
Make sure, you select tool, which is appropriate for the brand of your hard drive.
Depending on the program, it'll create bootable floppy, or bootable CD.
If downloaded file is of .iso type, use ImgBurn: http://www.imgburn.com/ to burn .iso file to a CD (select "Write image file to disc" option), and make the CD bootable.
NOTE. If your hard drive is made by Toshiba, unfortunately, you're out of luck, because Toshiba doesn't provide any diagnostic tool.
======================================================================================================
A. If you have more than one RAM module installed, try starting computer with one RAM stick at a time.
NOTE Keep in mind, the manual check listed above is always superior to the software check, listed below. DO NOT proceed with memtest, if you can go with option A
B. If you have only one RAM stick installed...
...run memtest...
1. Download - Pre-Compiled Bootable ISO (.zip)
2. Unzip downloaded memtest86+-2.11.iso.zip file.
3. Inside, you'll find memtest86+-2.11.iso file.
4. Download, and install ImgBurn: http://www.imgburn.com/
5. Insert blank CD into your CD drive.
6. Open ImgBurn, and click on Write image file to disc
7. Click on Browse for a file... icon:
8. Locate memtest86+-2.11.iso file, and click Open button.
9. Click on ImgBurn green arrow to start burning bootable memtest86 CD:
10. Once the CD is created, boot from it, and memtest will automatically start to run.
The running program will look something like this depending on the size and number of ram modules installed:
It's recommended to run 5-6 passes. Each pass contains very same 8 tests.
This will show the progress of the test. It can take a while. Be patient, or leave it running overnight.
The following image is the test results area:
The most important item here is the “errors” line. If you see ANY errors, even one, most likely, you have bad RAM.
#19
Posted 28 October 2009 - 02:12 PM
I can always try to get new ram from my tech guys tomorrow (I work at a college). Unfortunately this something they can't help with. Certainly could be a bad install. If nothing else, I may try a full install over the weekend or sometime next week. until then, I'll keep trying. UGH! Thanks!!!
#20
Posted 28 October 2009 - 02:34 PM
Keep us posted...
#21
Posted 02 November 2009 - 08:55 AM
Ended up reinstalling XP and all my applications over the weekend. The computer is now up and running. Thanks for your suggestions.
#22
Posted 02 November 2009 - 04:45 PM
Thanks for posting back
Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users