I believe the Motherboard is installed correctly but I can't figure out where the connectors from the computer to the Motherboard go; I'm afraid I was completely focused on the installation. There are three (3) connectors in question: One thick gray cable; a thin black/white cable; and a multi red/blue/black/yellow/white/green cable. The manual was no help and as this is my first time attempting this project, a tutorial or illustrations would be great but I can't find anything online. I contacted Intel and they were no help. My PC is an HP D220MT. Specs for the machine attached.
Any assistance is greatly appreciated as I have tried for the past few hours to resolve this issue on my own!
This topic was moved to the appropriate sections
Edited by sheperd06, 12 September 2010 - 08:35 PM.