otl and rkill won't run system tool version 2.20 has taken over my
Posted 11 December 2010 - 02:07 PM
Posted 11 December 2010 - 02:34 PM
Please print these instruction out so that you know what you are doing
127,353,979bytes / 121.4MB
- Download OTLPENet.exe to your desktop
- Ensure that you have a blank CD in the drive
- Double click OTLPENet.exe and this will then open imgburn to burn the file to CD
- Download the following scan.txt to a USB
- Reboot your system using the boot CD you just created.
Note : If you do not know how to set your computer to boot from CD follow the steps here
- As the CD needs to detect your hardware and load the operating system, I would recommend a nice cup of tea whilst it loads
- Your system should now display a Reatogo desktop.
Note : as you are running from CD it is not exactly speedy
- Double-click on the OTLPE icon.
- Select the Windows folder of the infected drive if it asks for a location
- When asked "Do you wish to load the remote registry", select Yes
- When asked "Do you wish to load remote user profile(s) for scanning", select Yes
- Ensure the box "Automatically Load All Remaining Users" is checked and press OK
- OTL should now start.
- Double click the Custom scans and fixes box
- In the dialogue locate the scan.txt you have on the USB
- Press Run Scan to start the scan.
- When finished, the file will be saved in drive C:\OTL.txt
- Copy this file to your USB drive if you do not have internet connection on this system.
- Right click the file and select send to : select the USB drive.
- Confirm that it has copied to the USB drive by selecting it
- You can backup any files that you wish from this OS
- Please post the contents of the C:\OTL.txt file in your reply.
Posted 11 December 2010 - 03:07 PM
Posted 11 December 2010 - 03:35 PM
Posted 11 December 2010 - 03:48 PM
Posted 11 December 2010 - 04:02 PM
Posted 11 December 2010 - 05:08 PM
Access violation at address 7CAOC936 in module 'SHELL32.dll'. Read of address 00000006.
Posted 12 December 2010 - 08:05 AM
Posted 12 December 2010 - 09:30 AM
Untitled - Notepad: notepade.exe - bad image
the application of DLL E:\Windows|system32|shell32.dll is not a valid Windows image. Please check the against your installation diskette. It did give me a note pad but when i tried to save it i couldn'tfind the usb. then it disappeared.
Posted 12 December 2010 - 09:36 AM
Posted 12 December 2010 - 09:49 AM
Posted 12 December 2010 - 10:42 AM
Posted 16 December 2010 - 02:33 PM
If you need this topic reopened, please contact a staff member. This applies only to the original topic starter. Everyone else please begin a New Topic.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users