hp nc 6400 does not power up
Started by
kanada1702
, May 26 2011 06:33 AM
#1
Posted 26 May 2011 - 06:33 AM
#2
Posted 26 May 2011 - 11:37 AM
If there is no sign of life whatsoever you may be looking at a power issue,
an incorrect connection, a short circuit or if using the same processor in
the replacement MB a dead CPU.
Have you tried removing the battery and running direct from the AC adapter?
Also try removing the Ram and powering up, any change.
an incorrect connection, a short circuit or if using the same processor in
the replacement MB a dead CPU.
Have you tried removing the battery and running direct from the AC adapter?
Also try removing the Ram and powering up, any change.
Possibly, dependent on what the answer is to the 1st question!could it be the bios battery gone bad?
#3
Posted 26 May 2011 - 12:26 PM
i have tried with and withou ram and battery and still nothing, since this is the 3 motherboard i've tried. it might be the bios battery, the cpu, hdd maybe these are the parts i keep each time
#4
Posted 26 May 2011 - 12:28 PM
should it show any sign of life without a cpu at all?
#5
Posted 26 May 2011 - 12:45 PM
Depends, it may be the CPU shorting out.should it show any sign of life without a cpu at all?
Try removing the MB from the chassis and powering up using only
the AC adapter, do not connect anything else to the MB, let us
know the outcome.
#6
Posted 20 July 2011 - 12:14 PM
hello sorry that i havnt written back in such a long time but had private problems, any way yes i will check what happends, i will write back soon
#7
Posted 21 July 2011 - 01:55 AM
No worries reply when you are able
#8
Posted 11 December 2011 - 11:56 AM
Sorry everone for the very late reply. i have finally given up since still after plugging in the motherboard alone didnt work. so my case is going to be dealt by HP so once i know i will let everyone know what the deal was, thanks for all the help from everyone
#9
Posted 11 December 2011 - 11:58 AM
Thanks for the update and good luck with HP.
Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users