[Mstat]

I currently have an old netopia usb wireless adapter for my old laptop. It has been bent at the connector and runs very hot. I just got a used DLinkDWL-G122 ver. D1 with firmware 4.00.

How should I prepare the computer for the new adapter? Should I disable or uninstall the netopia adapter first?

Thanks,

Mstat

[Advertisements]

How should I prepare the computer for the new adapter? Should I disable or uninstall the netopia adapter first?

Yes otherwise you may have driver conflicts which can cause system instability and/or crashes also be sure to use the
correct netopia uninstall procedure for the same reasons stated above; http://www.netopia.c...TP2000_003.html

[phillpower2]

How should I prepare the computer for the new adapter? Should I disable or uninstall the netopia adapter first?

Yes otherwise you may have driver conflicts which can cause system instability and/or crashes also be sure to use the
correct netopia uninstall procedure for the same reasons stated above; http://www.netopia.c...TP2000_003.html

[Mstat]

Thanks for the heads up on the uninstall. I will have time to do the work on Tuesday and will review the uninstall to verify it is there and take it out.

Thanks,

Mstat

[Mstat]

I want to thank you!!

The process worked beautifully and I now have a much cooler running usb wireless adapter.

Thanks again,

Mstat

[phillpower2]

You are most welcome Msta
I am happy that the issue is now resolved, thank you for choosing GTG, for allowing me to assist you and most of all thank you for keeping us updated so that the solution can help others with the same or similar issue