Start then All Programs. Look for folders with the name of your computer manufacture. Usually in one of them you find a way to start the Recovery Manager. Alternatively, pressing a key or key combination during boot will start it. Which key or key combo varies with manufactures, which is I need the make and model number. Should be able to find the Users Guide at their web site which will tell us how to do this.
Suddenly won't connect to the Internet
Started by
Missohmygod
, Jan 30 2012 12:41 PM
#16
Posted 01 February 2012 - 06:54 PM
Start then All Programs. Look for folders with the name of your computer manufacture. Usually in one of them you find a way to start the Recovery Manager. Alternatively, pressing a key or key combination during boot will start it. Which key or key combo varies with manufactures, which is I need the make and model number. Should be able to find the Users Guide at their web site which will tell us how to do this.
#17
Posted 01 February 2012 - 09:32 PM
I borrowed the wireless card from another computer (it was working) this computer recognizes it and has good signal strength but it still won't connect to the internet
Edited by Missohmygod, 01 February 2012 - 09:32 PM.
#18
Posted 01 February 2012 - 10:04 PM
My computer was a build no Manufacturer ie. dell or intel.... Will this still work?
#19
Posted 02 February 2012 - 03:48 PM
If it's not a computer from Dell, Compaq, HP, etc then there may not be a recovery partition on the hard drive so you will need a Vista/Windows 7 install DVD.
Which are you running, Vista or Windows 7?
How did the version of Windows you have get on the computer initially? Who ever you got it from should have provided you with the install DVD as that is a requirement from Microsoft for Vista and Windows 7.
Which are you running, Vista or Windows 7?
How did the version of Windows you have get on the computer initially? Who ever you got it from should have provided you with the install DVD as that is a requirement from Microsoft for Vista and Windows 7.
#20
Posted 02 February 2012 - 10:16 PM
I have the windows 7 disk, but it only installs another windows doesn't clear the old stuff off
#21
Posted 03 February 2012 - 08:52 PM
See here: How to Do a Clean Installation with Windows 7
That will show you how to remove what is currently installed and start with a new, fresh (Clean) istall of Win 7.
That will show you how to remove what is currently installed and start with a new, fresh (Clean) istall of Win 7.
#22
Posted 04 February 2012 - 11:04 AM
It didn't go exactly as shown hopefully I didn't mess things up more
#23
Posted 04 February 2012 - 11:24 AM
Ok I did that and it's still the same thing
Edited by Missohmygod, 04 February 2012 - 11:37 AM.
#24
Posted 04 February 2012 - 12:00 PM
My device drivers are 2008 do you think I just need updated ones and it will connect?
#25
Posted 04 February 2012 - 06:46 PM
I'm sorry but I don't know what you did or didn't do and what did or didn't work.
Were you able to follow the directions for a Clean Install? If not, what happened? Where did you have problems?
Where did you get the device drivers to install?
Are there any yellow marks in Device Manager (Start / Run, type devmgmt.msc and press Enter)
Were you able to follow the directions for a Clean Install? If not, what happened? Where did you have problems?
Where did you get the device drivers to install?
Are there any yellow marks in Device Manager (Start / Run, type devmgmt.msc and press Enter)
#26
Posted 04 February 2012 - 08:40 PM
I did get a clean install and reformat it didn't go exact ally as the site said but I did And my connection issues are the same so I'm asking should I save drivers onto a disk and put them on this one? If so what drivers and where do u find them
#27
Posted 04 February 2012 - 09:14 PM
First, are there any yellow marks in Device Manager (Start / Run, type devmgmt.msc and press Enter).
#28
Posted 05 February 2012 - 10:34 AM
Yellow marks? All the tabs are white
#29
Posted 05 February 2012 - 03:34 PM
Okay, that says all the device drivers are loaded and working correctly.
How are you connecting to the router now? You mentioned borrowing a wireless card but do you normally use an Ethernet cable?
I really need to see the output of ipconfig.
Please open a Elevated Command Prompt as follows: How to Open a Elevated Command Prompt in Windows 7
Enter the following exactly as shown, note the spaces between words and parameters:
ipconfig /all > postme.txt & ping yahoo.com >> postme.txt & notepad postme.txt & del postme.txt
and press ENTER.
A file will open in Notepad. Please copy and paste the contents here. Close the Notepad window and the file will be deleted. Type exit and press Enter to close the Command Prompt window.
Since you don't have a network connection to the computer, you will have to copy the data to a flash drive then take it to a computer that does have a network connection to paste it here.
Also, is your network connection built into the system board or is it an add-on PCI card? If it's built in it will be up near the USB ports. One possibility is to try an add-on PCI card and see if that fixes the problem, but I would like to see the output of ipconfig before doing anything else.
One other thought. Try booting to Safe Mode with Networking, see if that gives you a working network connection: How to Start Windows 7 in Safe Mode. Scroll down to 5. To Start in Safe Mode with Networking
How are you connecting to the router now? You mentioned borrowing a wireless card but do you normally use an Ethernet cable?
I really need to see the output of ipconfig.
Please open a Elevated Command Prompt as follows: How to Open a Elevated Command Prompt in Windows 7
Enter the following exactly as shown, note the spaces between words and parameters:
ipconfig /all > postme.txt & ping yahoo.com >> postme.txt & notepad postme.txt & del postme.txt
and press ENTER.
A file will open in Notepad. Please copy and paste the contents here. Close the Notepad window and the file will be deleted. Type exit and press Enter to close the Command Prompt window.
Since you don't have a network connection to the computer, you will have to copy the data to a flash drive then take it to a computer that does have a network connection to paste it here.
Also, is your network connection built into the system board or is it an add-on PCI card? If it's built in it will be up near the USB ports. One possibility is to try an add-on PCI card and see if that fixes the problem, but I would like to see the output of ipconfig before doing anything else.
One other thought. Try booting to Safe Mode with Networking, see if that gives you a working network connection: How to Start Windows 7 in Safe Mode. Scroll down to 5. To Start in Safe Mode with Networking
#30
Posted 06 February 2012 - 11:12 AM
No connection in safe mode
When I put in the txt in red it opened notepad and said commonly find postme would you like to open a new file
When I put in the txt in red it opened notepad and said commonly find postme would you like to open a new file
Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users