Moboard / Memory Compatibility
Started by
Day_late
, Apr 18 2012 09:54 PM
#1
Posted 18 April 2012 - 09:54 PM
#2
Posted 18 April 2012 - 11:09 PM
check the mobo manufacturers website; they should have a list of tested memory along with specs that are compatable.. Check the latency, voltage, slot, and speed. I would go with the fastest speed available, and would recommend going w/ 2x4gb; pay about 25% more than for 1 stick of 4gb.
#3
Posted 18 April 2012 - 11:11 PM
Forgot to add that I would get a second opinion; I'm no expert.
#4
Posted 19 April 2012 - 12:30 AM
Hi,
Here is you Mobo page, http://www.asus.com/...1155/P8H61M_LE/ click on memory support list.
I advise you install 8GB, in 2 slots, if you install 4Gb in 2 slots and you wish to upgrade later, you would have to dump the existing RAM, @ Newegg, http://www.newegg.co...N82E16820233192
Here is you Mobo page, http://www.asus.com/...1155/P8H61M_LE/ click on memory support list.
I advise you install 8GB, in 2 slots, if you install 4Gb in 2 slots and you wish to upgrade later, you would have to dump the existing RAM, @ Newegg, http://www.newegg.co...N82E16820233192
#5
Posted 19 April 2012 - 08:53 AM
Thanks for the inputs, guys. I'm sorry I wasn't more specific in the first post. The reason I'm looking for 4GB of memory in 2 2GB sticks is the OS is going to be 32-bit Windows 7 and 4GB is the most memory it can use. I've been to the ASUS site and printed out the memory QVL; it lists a bunch of candidates. Newegg (where I'm sourcing most of the parts) has a lot of memory but I'm not finding many exact matches with the QVL. I guess my question is if I need to get the exact memory part numbers listed in the QVL.
#6
Posted 19 April 2012 - 09:38 AM
There are so many different characterised RAM that only s certain number can be tested. Providing you match specification listed on a particular Mobo site,(quality/Branded) you would be very unfortunate to get RAM that was not comparable
This RAM is perfect for your Motherboard. http://www.newegg.co...2E16820145251.
This RAM is perfect for your Motherboard. http://www.newegg.co...2E16820145251.
#7
Posted 19 April 2012 - 12:33 PM
Thanks for the link. That solves my problem.
#8
Posted 19 April 2012 - 03:44 PM
Your welcome.
Is there a specific reason for using a 32bit OS rather than a 64bit version?
Is there a specific reason for using a 32bit OS rather than a 64bit version?
#9
Posted 19 April 2012 - 04:22 PM
My computing is pretty much e-mail, web browsing, some office applications and real basic photo editing. I've got several programs that won't run under a 64-bit system and I don't want to replace them. Don't foresee any gaming.
#10
Posted 19 April 2012 - 04:57 PM
Right, good reasons, especially not wanting to replace software.
Safety. Before going inside the computer or handling parts. Remember to unplug the PC, take anti static measure by briefly touching an unpainted part of the PC case.
Safety. Before going inside the computer or handling parts. Remember to unplug the PC, take anti static measure by briefly touching an unpainted part of the PC case.
#11
Posted 28 April 2012 - 03:26 PM
Just a quick "Thank you" to all the geeks here. The advice I got here, both in response to my questions and in the threads I reviewed, helped a lot with my first build. I'm still waiting for a new monitor and the OS, but I got everything else together, held my breath, and put the power to it. All the lights light, the fans run, the motherboard setup screen comes up on the (borrowed) monitor and the mouse and keyboard work. Maybe I shouldn't have been surprised, but I admit I was. Again, thanks guys.
Regards,
Warren
By the way, the OS I'm waiting for is the 64-bit version of Windows Home Premium. After the comments here, I reconsidered and returned the 32-bit version.
Regards,
Warren
By the way, the OS I'm waiting for is the 64-bit version of Windows Home Premium. After the comments here, I reconsidered and returned the 32-bit version.
Edited by Day_late, 28 April 2012 - 03:27 PM.
#12
Posted 28 April 2012 - 10:48 PM
Your welcome.
Good choice for the OS. As you did go 64bit, did you get 8GB of RAM to go with it?
Some tips you may consider using. Read through first. Update drivers only from the manufacturers web sites, especially graphics. Make sure windows firewall is active. Update your OS and drivers before installing other programs.
After installing the OS and drivers, create a folder in My Docs, (Backup Images) take a backup image of the C drive and save. , Create a rescue disk.
I create a manual restore point before every alteration, takes time but well worth it in case of problems.
Perform any necessary BIOS, Driver and OS updates. If the system is stable, Create a second Image and save.
Install you programs, if system is stable, create you third image. You now have choices to restore your system.
You can now restore any Data you saved. Make sure it goes where you want it to go.
Good Luck.
Good choice for the OS. As you did go 64bit, did you get 8GB of RAM to go with it?
Some tips you may consider using. Read through first. Update drivers only from the manufacturers web sites, especially graphics. Make sure windows firewall is active. Update your OS and drivers before installing other programs.
After installing the OS and drivers, create a folder in My Docs, (Backup Images) take a backup image of the C drive and save. , Create a rescue disk.
I create a manual restore point before every alteration, takes time but well worth it in case of problems.
Perform any necessary BIOS, Driver and OS updates. If the system is stable, Create a second Image and save.
Install you programs, if system is stable, create you third image. You now have choices to restore your system.
You can now restore any Data you saved. Make sure it goes where you want it to go.
Good Luck.
#13
Posted 12 May 2012 - 03:32 AM
Hi.
How are things going? Did you finish the build?
An update would be welcome.
How are things going? Did you finish the build?
An update would be welcome.
#14
Posted 12 May 2012 - 07:40 AM
The build went well, but there are minor problems. The top fan in the case didn't work and I'm waiting for a replacement from Antec to arrive. I used the computer for about a week and Windows 7 64-bit got more and more unstable (I keep getting the blue screen), but all my 32-bit software runs okay. The reused hard drive is a bit noisy, so I'm thinking of replacing it with a 128GB SSD. Once that's in, I'll do a clean install of Windows, add software one program at a time, and give each program a day or so to show any instability. If there's an easier (or quiicker) way to do that, I'd like to know about it.
For info, I installed (in order):
Windows 7 Home Premium 64-bit
Microsoft Security Essentials (got a clean scan)
Updates to Windows and Internet Explorer
Microsoft Office 2003
Firefox
Chrome
LastPass
Macrium Reflect backup software (made backup medium and did an image backup)
Spesoft free CD ripping software
I was really pleased with the ease of installing Windows 7. Getting drivers for a couple clean installs of Windows XP in the last month was hard. With Windows 7 it was a breeze.
For info, I installed (in order):
Windows 7 Home Premium 64-bit
Microsoft Security Essentials (got a clean scan)
Updates to Windows and Internet Explorer
Microsoft Office 2003
Firefox
Chrome
LastPass
Macrium Reflect backup software (made backup medium and did an image backup)
Spesoft free CD ripping software
I was really pleased with the ease of installing Windows 7. Getting drivers for a couple clean installs of Windows XP in the last month was hard. With Windows 7 it was a breeze.
#15
Posted 12 May 2012 - 09:25 AM
Good to hear from you. Disappointing when you get some hardware that is not up to scratch.
1. Overheating will cause your PC to slow down and possible crash. use your Mobo health utility to monitor your temps and post a screen shot.
2. Your HDD may be faulty. Select the appropriate diagnostics tool from this page, download, follow instruction, let us know the result.
> http://pcsupport.abo...p/tophddiag.htm
Will answer your other questions after performing the above.
You did not mention updating the BIOS or Mobo drivers.
Why have you 3 browsers? If they are all loading at windows start-up, they will slow down the computer.
This could be a hardware of software issue and should be investigated.
(I keep getting the blue screen)
1. Overheating will cause your PC to slow down and possible crash. use your Mobo health utility to monitor your temps and post a screen shot.
2. Your HDD may be faulty. Select the appropriate diagnostics tool from this page, download, follow instruction, let us know the result.
> http://pcsupport.abo...p/tophddiag.htm
Will answer your other questions after performing the above.
You did not mention updating the BIOS or Mobo drivers.
Why have you 3 browsers? If they are all loading at windows start-up, they will slow down the computer.
Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users