[Andro]

Ok I will get back that CD tommorow and let you know how it goes

[Advertisements]

I finally got back my CD but nothing new I'm affraid. I run sfc again, inserted this CD and Windows file protection window appeared. When the check was completed that window disappeared without any message.

[Andro]

I finally got back my CD but nothing new I'm affraid. I run sfc again, inserted this CD and Windows file protection window appeared. When the check was completed that window disappeared without any message.

[rshaffer61]

Is this a full OS installation disk, recovery disk or upgrade disk?

[Andro]

It's a full installation disk...

[rshaffer61]

OK then lets do a Repair Installation and see if it will resolve the issue. This normally will not cause the loss of any data but there is always a chance. If you want to backup your data first to be safe that is fine.






Repair Installation Instructions

· Insert your Windows XP CD in your CD-ROM and then Restart your computer.

· At the first post screen start tapping the Del key to enter System Bios
· Find the Advance Options or Boot Sequence screen.
· You will need to change the boot sequence so that the CDrom is first and the HD is second.
· Press F10 to Save and Exit and then press Enter to accept.
· The system will now reboot
· When the "Press any key to boot from CD" message is displayed on your screen, press a key to start your computer from the Windows XP CD.
· When you see the following message displayed on the Welcome to Setup screen, press ENTER
· To setup Windows XP now, press ENTER.
· At this point an option to press R to enter the Recovery Console is displayed. DO NOT SELECT THIS OPTION.

· On the Windows XP Licensing Agreement screen, press F8 to agree to the license agreement.
· Make sure that your current installation of Windows XP is selected and highlighted in the box, and then press the R key to repair Windows XP.
· Follow the instructions on the screen to complete Setup.

You can also go HERE
to read a step by step tutorial with screenshots.

[Macboatmaster]

I fully agree with the repair suggestion by my colleague rshaffer61, as he would expect, but have you tried my suggestions.
They were not just confined to not using the two programs, they contained possible solutions

[Andro]

@Macboatmaster: Yes I did what you suggest so I uninstalled TuneUp,Regclean Pro&toolbars but I think BSOD is not a problem anymore (I didin't get any since BIOS update). What is causing trouble is gmfiltr.sys file which is needed on Scroll Mouse Driver Installation Disk #1 !

@rshaffer61: Should I try with repair now?

[rshaffer61]

Yes as it will replace or repair the file if it part of the OS itself. If it is a specialized driver we may need to do some searching for it.

[Andro]

Here I am again...sorry 4 late reply....been busy last days

I'm writing this post from another computer because I can't log on my desktop anymore!

So...I followed your repair instructions and got another problem...when the computer restarted to complete repair setup that message showed again.From this point all stopped.Mouse&keyboard doesn't work so setup can't continue (see attached picture)

Please help...I didn't save any data but I don't wanna lose all files!

Attached Thumbnails

• 

[rshaffer61]

OK before we go any further I want to make sure you can get your data backed up safely. We can accomplish this by using a Linux Live cd.




Use Puppy Linux Live CD to Recover Your Data:

===================
***Required Hardware***
CD Burner (CDRW) Drive,
Blank CD,
Extra Storage Device (USB Flash Drive, External Hard Drive)
===================

1. Save these files to your Desktop/Burn Your Live CD:

• Download Latest Puppy Linux ISO (i.e.: lupu-528.iso)
  Download BurnCDCC ISO Burning Software
  
  There are instructions on how to boot from flash drive with puppy here; http://www.pendrivel...e-from-windows/
  
  
• Open BurnCDCC with Windows Explorer
• Extract All files to a location you can remember
• Double Click BurnCDCC
• Click Browse and navigate to the Puppy Linux ISO file you just downloaded
• Open/Double Click that file
  IMPORTANT: Adjust the speed bar to CD: 4x DVD: 1x
• Click Start
• Your CD Burner Tray will open automatically
• Insert a blank CD and close the tray
• Click OK

Puppy Linux Live CD will now be created
2. Set your boot priority in the BIOS to CD-ROM first, Hard Drive Second

• Start the computer/press the power button
• Immediately start tapping the appropriate key to enter the BIOS, aka "Setup"
  (Usually shown during the "Dell" screen, or "Gateway" Screen)
• Once in the BIOS, under Advanced BIOS Options change boot priority to:
  CD-ROM 1st, Hard Drive 2nd
• Open your ROM drive and insert the disk
• Press F10 to save and exit
• Agree with "Y" to continue
• Your computer will restart and boot from the Puppy Linux Live CD
  
  

3. Recover Your Data

• Once Puppy Linux has loaded, it is actually running in your computer's Memory (RAM). You will see a fully functioning Graphical User Interface similar to what you normally call "your computer". Internet access may or may not be available depending on your machine, so it is recommended you print these instructions before beginning. Also, double clicking is not needed in Puppy. To expand, or open folders/icons, just click once. Puppy is very light on resources, so you will quickly notice it is much speedier than you are used to. This is normal. Ready? Let's get started.
  
  3a. Mount Drives
• Click the Mount Icon located at the top left of your desktop.
• A Window will open. By default, the "drive" tab will be forward/highlighted. Click on Mount for your hard drive.
• Assuming you only have one hard drive and/or partition, there may be only one selection to mount.
• USB Flash Drives usually automatically mount upon boot, but click the "usbdrv" tab and make sure it is mounted.
• If using an external hard drive for the data recovery, do this under the "drive" tab. Mount it now.

3b. Transfer Files.

• At the bottom left of your desktop a list of all hard drives/partitions, USB Drives, and Optical Drives are listed with a familiar looking hard drive icon.
• Open your old hard drive i.e. sda1
• Next, open your USB Flash Drive or External Drive. i.e. sdc or sdb1
• If you open the wrong drive, simply X out at the top right corner of the window that opens. (Just like in Windows)
• From your old hard drive, drag and drop whatever files/folders you wish to transfer to your USB Drive's Window.

For The Novice: The common path to your pictures, music, video, and documents folders is: Documents and Settings >> All Users (or each idividual name of each user. CHECK All Names!) >> Documents >> You will now see My Music, My Pictures, and My Videos.

Remember to only click once! No double clicking! Once you drag and drop your first folder, you will notice a small menu will appear giving you the option to move or copy. Choose COPY each time you drag and drop.

YOU ARE DONE!!! Simply click Menu >> Mouse Over Shutdown >> Reboot/Turn Off Computer. Be sure to plug your USB Drive into another working windows machine to verify all data is there and transferred without corruption. Congratulations!





If you're doing this to recover from a virus or malware infection, (or even if you're not), DO NOT copy executable files (.exe, .scr. etc...) if any of these files are infected you could be copying the corruption over to any new device/computer. just copy documents, pictures, music, or videos.

[Andro]

I finally managed to copy all important data...next step please

[rshaffer61]

Now we do a repair installation.



What I would suggest you do is to Backup your Data Files.
For this I would suggest using a External Hard Drive Enclosure. This will allow you to keep your Important Data safe and Separated from the main system in case of problems. The cost for this kind of Backup System has come down a lot. I would suggest a 500 Gig capacity for your needs. Since you will only be Backing Up Data Files Only this should be sufficient to do that for you. Follow the next two links to see examples of the price you will be looking at.
• HERE
• HERE

I suggest going to Microsofts Backup Tutorial and follow the steps to do a Backup to a External Drive and also it will guide you on how to do a Scheduled Backup even at night.

Another way you can do a Backup is by using DVD’s. This method is just as effective and can be done using the same steps as above.


After the above is done then go on to the next step.



Repair Installation Instructions

· Insert your Windows XP CD in your CD-ROM and then Restart your computer.

· At the first post screen start tapping the Del key to enter System Bios
· Find the Advance Options or Boot Sequence screen.
· You will need to change the boot sequence so that the CDrom is first and the HD is second.
· Press F10 to Save and Exit and then press Enter to accept.
· The system will now reboot
· When the "Press any key to boot from CD" message is displayed on your screen, press a key to start your computer from the Windows XP CD.
· When you see the following message displayed on the Welcome to Setup screen, press ENTER
· To setup Windows XP now, press ENTER.
· At this point an option to press R to enter the Recovery Console is displayed. DO NOT SELECT THIS OPTION.

· On the Windows XP Licensing Agreement screen, press F8 to agree to the license agreement.
· Make sure that your current installation of Windows XP is selected and highlighted in the box, and then press the R key to repair Windows XP.
· Follow the instructions on the screen to complete Setup.

You can also go HERE
to read a step by step tutorial with screenshots.

[Andro]

How can I backup my files if I can't even log on my desktop?

[rshaffer61]

You have already done that with puppy earlier. Just skip that part and move on to the repair installation itself. Sorry about that it is part of the instructions normally when doing any repair to backup first. I should have deleted that part of the instructions.

[Andro]

I tried to repair once again (when I accepted that License Agreement and pressed R Windows warned me that it already tried to repair current installation so I click Repair button again) but when the computer restarted itself nothing happened. Windows was loading and then black screen appeared with mouse arrow in the middle (mouse isn't working altough it's connected)...